We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white PoE+ splitter with USB-C port and RJ45 jack

TAURKENAM

TAURKENAM PoE+ USB-C Splitter Gigabit RJ45 27W

SKU CH-VB23-70KJR

Splits PoE+ into USB-C power up to 27W and Gigabit Ethernet over 100 metres with PD voltage steps and full protection

  • Delivers up to 27W via USB-C from IEEE 802.3at PoE+ sources
  • Gigabit Ethernet data pass-through at 10/100/1000 Mbps over RJ45
  • Powers USB-C devices at 5V, 9V, 12V, 15V or 20V via PD protocol
  • Operates up to 100 metres from PoE injector or switch
  • Built-in over-voltage, over-current and short-circuit protection for safe operation

PoE+ USB-C Power Splitter

This TAURKENAM splitter converts IEEE 802.3at PoE+ or 30W passive PoE input into USB-C Power Delivery output up to 27W. It suits installers who need to power non-PoE USB-C devices such as Raspberry Pi 4, Nest Cam, Eero or Google Wifi units from a PoE switch or injector. The RJ45 port passes Gigabit data at 10/100/1000Mbps while the USB-C port supplies power only.

Power Delivery Voltage Steps

The single specification that decides compatibility is the PD voltage ladder: 5V/3A, 9V/3A, 12V/3A, 15V/3A and 20V/2.25A. Your USB-C device must negotiate one of these exact profiles; if it requires a different fixed voltage or exceeds 27W the splitter will not power it. The unit accepts PoE+ or 30W passive PoE sources and includes over-voltage, over-current and short-circuit protection.

Installation Notes

Connect the PoE source to the RJ45 input, then run a Cat5e or Cat6 cable up to 100 metres to the splitter. Plug a USB-C cable from the splitter’s female port to the target device; the USB-C port carries no data, so a separate Ethernet cable from the RJ45 output is needed for network connectivity. Common issues arise when the device draws more than 27W or requests an unsupported PD voltage.

Highlights

  • Delivers up to 27W via USB-C from IEEE 802.3at PoE+ sources
  • Gigabit Ethernet data pass-through at 10/100/1000 Mbps over RJ45
  • Powers USB-C devices at 5V, 9V, 12V, 15V or 20V via PD protocol
  • Operates up to 100 metres from PoE injector or switch
  • Built-in over-voltage, over-current and short-circuit protection for safe operation

Specifications

No published specifications for this item yet.

Questions about this item

What does the 27 W output mean for a USB-C laptop or tablet?

The splitter negotiates 5 V, 9 V, 12 V, 15 V or 20 V at up to 27 W through USB Power Delivery, so a MacBook, iPad or similar device charges at its supported rate.

How does the IEEE 802.3 at PoE+ input limit power and data?

The RJ45 port accepts up to 30 W PoE+ and passes 10/100/1000 Mbps Ethernet; the USB-C port supplies power only, no data.

What cabling and distance are needed to mount the splitter?

Use Cat5, Cat5e or Cat6 cable up to 100 metres from the PoE injector or switch to the splitter; a USB-C cable then runs from the splitter to the device.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.