We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black PoE splitter with Ethernet and micro USB ports

TAURKENAM

TAURKENAM PoE Splitter Gigabit 5V 2.4A 1000Mbps 802.3af

SKU CH-0R1N-N2HHW

Power micro-USB devices over Ethernet up to 400 feet with 5V 2.4A and gigabit data; requires 802.3af PoE source

  • TypeEthernet Adapter
  • Power micro-USB devices through Ethernet with 1000Mbps data and 5V/2.4A output
  • Operate as a PoE HAT alternative without using GPIO pins, fits cases with fans
  • Extend power delivery up to 400 feet for devices lacking nearby AC outlets
  • Eliminate separate power adapters when Ethernet cabling is already required
  • Plug-and-play setup works with any 802.3af compliant PoE injector or switch

Power and data over one cable

This PoE splitter delivers 5 V at 2.4 A to micro-USB devices while passing 1000 Mbps Ethernet through a single cable. It removes the need for a local AC outlet and works with Raspberry Pi 3B+ and earlier models without occupying GPIO pins. An 802.3af compliant PoE injector or switch is required but not included.

Limited to 802.3af power budget

The IEEE 802.3af standard caps the available power at the source, so the splitter cannot exceed its rated 5 V 2.4 A output regardless of the injector used. Gigabit data runs at full line rate, but the power budget is fixed by the standard and cannot support higher-wattage devices.

Up to 400 feet of reach

Ethernet cabling carries both power and data to micro-USB devices up to 400 feet from the PoE source, ideal for cameras, tablets or single-board computers in remote locations. Devices that draw more than 2.4 A at 5 V or require a different voltage will need a separate supply.

Highlights

  • Power micro-USB devices through Ethernet with 1000Mbps data and 5V/2.4A output
  • Operate as a PoE HAT alternative without using GPIO pins, fits cases with fans
  • Extend power delivery up to 400 feet for devices lacking nearby AC outlets
  • Eliminate separate power adapters when Ethernet cabling is already required
  • Plug-and-play setup works with any 802.3af compliant PoE injector or switch

Specifications

TypeEthernet Adapter

Questions about this item

Should I choose this splitter for a Raspberry Pi 3B+ or earlier models?

Yes — it is designed as a PoE HAT alternative that uses no GPIO pins, so it fits inside cases with fans or add-on screens for the Pi 3B+ and previous generations.

What does the 1000Mbps rating mean when the splitter is connected to my device?

It provides gigabit data throughput over the Ethernet cable while simultaneously delivering 5 V at up to 2.4 A to the micro-USB port.

Which PoE standard does the splitter use and what distance can it cover?

It follows the 802.3 af standard and can power devices from up to 400 feet away when paired with a compliant injector or switch.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.