We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TAURKENAM

TAURKENAM PoE Splitter 5V 2.5A 5.5x2.1mm DC Plug IEEE 802.3af/at

SKU CH-M5Q4-67Z1J

Converts 40V-57V PoE input to 5V 2.5A DC via 5.5x2.1mm plug with IEEE 802.3 af/at compliance and isolation protection

  • TypeAccessories
  • Delivers 5V 2.5A to non-PoE devices
  • Accepts 40-57V input from PSE equipment
  • Complies with IEEE 802.3 af/at standard
  • Isolation circuit guards connected hardware
  • Fits 5.5x2.1mm DC power sockets

Purpose and Audience

The TAURKENAM PoE Splitter delivers 5V at 2.5A to non-PoE devices such as IP cameras, VoIP phones or wireless access points. It suits installers who need to power 5 V equipment from an existing IEEE 802.3af/at infrastructure.

Connectors and Protection

A 5.5 mm by 2.1 mm DC plug provides the output connection while the unit accepts 40 V to 57 V from the power sourcing equipment. Built-in isolation, short-circuit and over-voltage circuits protect the attached hardware from power anomalies.

Standard Limits

Operation is confined to the IEEE 802.3af/at power envelope, so devices requiring more than 2.5 A at 5 V cannot be supported. The splitter also cannot function with passive PoE injectors or voltages outside the 40 V to 57 V negotiation range.

Highlights

  • Delivers 5V 2.5A to non-PoE devices
  • Accepts 40-57V input from PSE equipment
  • Complies with IEEE 802.3 af/at standard
  • Isolation circuit guards connected hardware
  • Fits 5.5x2.1mm DC power sockets

Specifications

TypeAccessories

Questions about this item

What does the IEEE 802.3 af/at standard limit the input voltage to?

The splitter accepts 40V-57V from a PSE power supply module and automatically detects the supplied voltage.

What DC plug size does the output side use for the 5V 2.5A connection?

The output uses a 5.5x2.1mm DC barrel plug to power non-PoE devices such as IP cameras or VoIP phones.

How is the unit connected, and what step is often missed?

Connect the PoE input to a PSE source, then plug the 5.5x2.1mm barrel into the device; the step often missed is verifying the PSE delivers 40V-57V so the splitter can auto-detect and enable output.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.