We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular OBD2 breakout box with LCD screen and 16-pin connector, multi-colour LEDs visible

TAURKENAM

TAURKENAM OBD2 Breakout Box 16-Pin CAN Bus Test with LCD Display

SKU CH-KGGT-A40NQ

A 16-pin OBDII breakout box with an LCD display monitors protocol, power and ground signals to help diagnose ECU or decoder faults

  • Typetype
  • Quick protocol monitoring with colour-coded LEDs on pins 2 6 7 10 14 15
  • Instant power and ground verification via red and green indicators
  • On-board LCD display confirms OBD port voltage before testing
  • 16-pin breakout interface gives full access to every diagnostic signal
  • Helps isolate ECU or decoder faults without guesswork

OBDII protocol detector for diagnostics

The TAURKENAM breakout box connects to the vehicle OBDII diagnostic link connector and gives technicians direct access to each pin. Colour-coded LEDs show protocol activity, power and ground status at a glance. It helps determine whether a fault lies with the ECU or the scanner.

Voltage display and LED signal monitoring

A built-in digital display shows port voltage so wiring faults are spotted before a scan begins. Yellow LEDs on pins 2, 6, 7, 10, 14 and 15 flash with the communication waveform. Green LEDs on pins 4 and 5 confirm solid ground, while the red LED on pin 16 confirms constant power.

16-pin interface and cable verification

The 16-pin interface mirrors the standard OBDII connector, allowing any compatible scanner to plug straight through. The display confirms that the cable and vehicle port are seated correctly. No software or external power supply is required for operation.

Highlights

  • Quick protocol monitoring with colour-coded LEDs on pins 2 6 7 10 14 15
  • Instant power and ground verification via red and green indicators
  • On-board LCD display confirms OBD port voltage before testing
  • 16-pin breakout interface gives full access to every diagnostic signal
  • Helps isolate ECU or decoder faults without guesswork

Specifications

Typetype

Questions about this item

How do I connect the TAURKENAM breakout box to the vehicle OBDII port and which step is most often missed?

Plug the 16-pin male connector directly into the car DLC, then attach your scanner to the female side; the step often skipped is verifying the red LED on pin 16 and green LEDs on pins 4 and 5 are solid before starting communication.

What maintenance or replacement will the TAURKENAM OBD2 breakout box need over time?

No scheduled maintenance is required; inspect the 16-pin connector for bent pins or corrosion and replace the unit if the yellow protocol LEDs on pins 2, 6, 7, 10, 14 or 15 stop flashing during active communication.

What is the first limit that appears when using the TAURKENAM breakout box continuously on a live vehicle?

The LCD voltage display will stop updating reliably if the vehicle battery drops below roughly 10 volts, so sustained use is limited by the car electrical system rather than the tool itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.