TAURKENAM
TAURKENAM NEMA 6-20 Extension Power Adapter 25FT 12AWG 20A 250V Black
25 ft 12 AWG extension cord with NEMA 6-20 connectors rated 20 A at 250 V, cold-weather flexible jacket, UL listed
- 25 ft reach powers distant equipment without moving outlets
- 12 AWG conductors carry 20 A at 250 V for heavy loads
- Cold-weather rubber jacket stays flexible in freezing temperatures
- NEMA 6-20 plug and connector fit EV chargers, welders, heaters
- UL listed construction meets recognised safety standards
Power Extension for High-Draw Equipment
This 25FT extension cord carries a NEMA 6-20 plug and matching connector rated for 20A at 250V. It suits owners of air conditioners, portable heaters, treadmills, CNC routers or EV chargers who need extra reach from an existing 6-20 outlet.
Cold-Weather Flexible SJTW Build
The 12AWG SJTW jacket uses an elastomer rubber that stays pliable in low temperatures, so the cord coils and routes easily on a garage floor or workshop bench. A T-blade female connector locks securely to the equipment plug, reducing accidental disconnects during vibration or movement.
Single-Circuit Length Limit
At 25FT the voltage drop on a 20A load remains within typical limits for a 12AWG conductor, but longer runs would require heavier gauge wire. The cord extends one 6-20 circuit only; it does not split power or adapt to other receptacle types.
Highlights
- 25 ft reach powers distant equipment without moving outlets
- 12 AWG conductors carry 20 A at 250 V for heavy loads
- Cold-weather rubber jacket stays flexible in freezing temperatures
- NEMA 6-20 plug and connector fit EV chargers, welders, heaters
- UL listed construction meets recognised safety standards
Specifications
No published specifications for this item yet.
Questions about this item
What current and voltage does the NEMA 6-20 connector handle on this 25 ft cord?
The NEMA 6-20 plug and connector are rated for 20 A at 250 V, matching the 12 AWG SJTW cable rating.
What clearance does the T-blade female connector need to sit flush?
The moulded NEMA 6-20R body fits standard US outlets; allow roughly 50 mm depth behind the receptacle for the strain relief.
How do I secure the cord so the plug does not pull loose under load?
Fully seat the T-blade prongs until the face sits flat, then use the built-in strain-relief collar or a cable tie near the connector to stop tension on the pins.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114926BTC
In stock
