We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow heavy-duty extension cord with T-blade female receptacle and standard male plug, 25 feet

TAURKENAM

TAURKENAM NEMA 5-20P to 5-20R/5-15R extension cord 12 AWG 20A 125V 2500W 25FT

SKU CH-DKCD-0S6HB

A 25-foot extension cord with a NEMA 5-20P plug and a 5-20R/5-15R receptacle, using 12 AWG copper wire rated for 20 A, 125 V and 2500 W

  • Handles 20 A loads with 12 AWG copper conductors
  • 25 ft reach extends power to distant equipment
  • UL-approved STW jacket rated for heavy-duty use
  • 5-20R T-blade outlet also accepts 5-15 plugs
  • 125 V 2500 W capacity suits high-draw devices

NEMA 5-20P to 5-20R/5-15R extension cord

This 25-foot extension cord connects a NEMA 5-20P male plug to a female receptacle that accepts both 5-20R T-blade and standard 5-15R plugs. It uses 12 AWG copper conductors rated for 20 amps at 125 volts, delivering up to 2500 watts. The STW jacketed cable is UL approved for heavy-duty use.

Indoor equipment needing a longer 20-amp reach

Suitable for workshops, garages or server racks where a 20-amp outlet must be extended to equipment with either a 5-20P or 5-15P plug. Not for outdoor permanent installation, wet locations or circuits exceeding the 20-amp, 2500-watt rating. Buyers needing a different length should choose another option from the 2, 6, 10, 16, 50 or 100-foot range.

12 AWG copper wire rated 20 amps at 125 volts

The 12 AWG 100-percent copper conductor determines the safe continuous load of 20 amps and 2500 watts at 125 volts. UL-listed STW construction confirms the cable meets the required safety standard for this ampacity. Verify your circuit breaker and equipment draw match these limits before use.

Highlights

  • Handles 20 A loads with 12 AWG copper conductors
  • 25 ft reach extends power to distant equipment
  • UL-approved STW jacket rated for heavy-duty use
  • 5-20R T-blade outlet also accepts 5-15 plugs
  • 125 V 2500 W capacity suits high-draw devices

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the NEMA 5-20P plug to a 5-15R outlet using this cord?

The female end accepts both 5-20R and 5-15R plugs, so you simply insert the 5-15R plug into the receptacle; the T-blade slot accommodates the neutral blade.

Will the 12 AWG copper conductors need replacement after heavy use?

The 100% copper wire inside the STW jacket is rated for continuous 20 A loading and does not require scheduled replacement under normal conditions.

At what load does the 25 ft length hit its thermal limit first?

The UL-approved 12 AWG STW cable supports a maximum of 20 A at 125 V (2500 W); sustained loads at that rating reach the ampacity limit before voltage drop becomes critical.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.