TAURKENAM
TAURKENAM NEMA 14-50P to 14-50R Power Adapter 1.5FT
A 1.5 ft NEMA 14-50P to 14-50R extension cord rated for 50 A and up to 12500 W at 250 V, built with 100 % copper conductors and a straight plug for generator outlets
- Heavy-duty 100 % copper conductor handles 50 A continuous loads
- Straight NEMA 14-50P plug inserts into generator outlets without obstruction
- Ergonomic handle on 14-50R female end makes connect and disconnect effortless
- STW 6 AWG / 3C + 8 AWG / 1C stranded cable rated for 7500 W at 125 V
- Electro-plated copper terminals resist surface oxidation for long-term reliability
TAURKENAM NEMA 14-50 Power Adapter
This 1.5FT adapter connects a NEMA 14-50P straight plug to a 14-50R female receptacle. It is built for RV and generator hookups where a short, heavy-duty link is needed. The straight plug design inserts into generator outlets without obstruction. The female connector includes a handle for easy push and pull operation.
50 Amp capacity with copper conductors
Internal wiring uses STW 6AWG/3C plus 8AWG/1C stranded copper conductors rated for a maximum 50 AMP load. At 125 Voltage the adapter supports up to 7500 Watt; at 250 Voltage it supports up to 12500 Watt. Electroplated copper terminals resist surface oxidation over time. It is not suited for loads exceeding the 50 AMP rating or for permanent hard-wired installations.
Generator-ready straight plug design
The straight NEMA 14-50P plug fits generator receptacles cleanly without blocking adjacent outlets. The 1.5FT length keeps cable clutter minimal in tight compartments. Molded construction and a handled female end simplify frequent connect and disconnect cycles. Builders needing longer reach or a different plug angle will require a separate cord.
Highlights
- Heavy-duty 100 % copper conductor handles 50 A continuous loads
- Straight NEMA 14-50P plug inserts into generator outlets without obstruction
- Ergonomic handle on 14-50R female end makes connect and disconnect effortless
- STW 6 AWG / 3C + 8 AWG / 1C stranded cable rated for 7500 W at 125 V
- Electro-plated copper terminals resist surface oxidation for long-term reliability
Specifications
No published specifications for this item yet.
Questions about this item
Will the straight NEMA 14-50P plug on this 1.5FT adapter clear the recessed outlet on my older generator without forcing it?
The straight-style NEMA 14-50P plug is designed to insert into generator outlets without obstruction, so it should mate cleanly with the recessed inlet on your existing unit.
How can I confirm the 6AWG/3C + 8AWG/1C copper conductors are delivering the full 50 A rating after I connect the adapter?
Under load the electroplate copper terminals resist oxidation and the handle-equipped 14-50R female connector seats firmly; a clamp meter on the circuit should read up to 50 A at 125 V or 250 V.
Does the package include only the 1.5FT NEMA 14-50P to 14-50R adapter, or are extra cables or mounting hardware supplied?
The box contains the single 1.5FT adapter with a straight 14-50P plug and a handled 14-50R receptacle; no additional cords or hardware are included.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



