We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange 10-foot extension cord with molded three-prong NEMA 10-30 plug and matching receptacle, black PVC jacket

TAURKENAM

TAURKENAM NEMA 10-30P to 10-30R Extension Cord 10 ft 30A 125V/250V 7500W

SKU CH-7495-69YJH

Extends a NEMA 10-30 dryer or EV outlet by ten feet with a 30-amp, 10 AWG copper cord rated for 7500 watts and ETL listed safety

  • 30 A 125/250 V rating powers dryers and Level 2 EV chargers at up to 7500 W
  • 10 ft length lets you reach distant outlets without moving the appliance
  • 10 AWG 100 % copper conductors with STW jacket resist abrasion, moisture and heat outdoors
  • Molded NEMA 10-30 plug and receptacle give a secure, ETL-listed connection
  • PVC jacket stays flexible for easy routing and storage

NEMA 10-30 Extension Cord 10 ft

This 10-foot extension cord carries a NEMA 10-30 plug to a matching NEMA 10-30 receptacle. It is rated for 30 amps at 125V/250V and supports up to 7500 watts. The cord suits dryer power extension or Level 2 EV charging where the outlet sits too far from the appliance.

10AWG STW Jacket and Molded Ends

Heavy-duty 10AWG three-conductor cable is wrapped in a waterproof PVC STW jacket rated for 600 volts and outdoor use. The jacket resists abrasion, moisture and heat while staying flexible. Molded plug and receptacle ends lock together securely and the assembly carries an ETL listing.

30 Amp 7500 Watt Rating Decides Fit

The single specification that determines whether this cord works for you is the 30-amp, 7500-watt rating at 125V/250V. Buyers whose equipment draws more current or requires a different NEMA configuration cannot use this cord.

Highlights

  • 30 A 125/250 V rating powers dryers and Level 2 EV chargers at up to 7500 W
  • 10 ft length lets you reach distant outlets without moving the appliance
  • 10 AWG 100 % copper conductors with STW jacket resist abrasion, moisture and heat outdoors
  • Molded NEMA 10-30 plug and receptacle give a secure, ETL-listed connection
  • PVC jacket stays flexible for easy routing and storage

Specifications

No published specifications for this item yet.

Questions about this item

What does the NEMA 10-30 interface support on this cord?

The NEMA 10-30 plug and receptacle are rated for 125V/250V at 30 amps, delivering up to 7500 watts for dryer or Level 2 EV charging.

What physical clearance does the 10-foot, 10AWG/3 STW cable need?

The heavy-duty 10AWG/3 cord with STW jacket is 10 feet long and rated for 600 volts, so allow space for its diameter and bend radius near the outlet.

How do I install it, and what step is often missed?

Insert the molded NEMA 10-30 plug fully into the wall receptacle until it seats firmly, then connect your dryer or EV charger to the matching receptacle; the step often missed is verifying both connections are fully seated for a secure, ETL-listed link.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.