TAURKENAM
TAURKENAM L6-20P to L6-20R Power Cord 20A 250V 12/3 SJT 15 Foot
Connects NEMA L6-20P plug to L6-20R receptacle with twist-lock ends, 12/3 SJT cable, 20 A 250 V rating, 15 foot length
- Secure twist-lock connection prevents accidental disconnection
- UL listed safety certification ensures reliable operation
- 20 amp 250V rating supports high-power equipment
- 12 AWG three-conductor cable handles heavy current loads
- 15 foot length provides flexible placement options
Industrial Power Extension
This TAURKENAM cord extends a NEMA L6-20 outlet by fifteen feet using 12-gauge SJT cable rated for twenty amps at two hundred fifty volts. The twist-lock plug and connector prevent accidental disconnection in rack or floor-mounted equipment. It suits server rooms, data centres and industrial workstations that need reliable high-voltage distribution.
Twist-Lock Integration
Both ends use the L6-20 twist-lock interface so the cord plugs directly into matching PDUs, UPS units or wall receptacles without adapters. The locking mechanism frees technicians from checking tension on straight-blade plugs during vibration or cable management. UL listing confirms the assembly meets North American safety standards for permanent installation.
Continuous Load Behaviour
Under sustained twenty-amp draw the 12-gauge conductors maintain voltage stability across the full fifteen-foot run without overheating. The SJT jacket resists oil, abrasion and temperature cycling typical of raised-floor environments. The cord is not suited for outdoor exposure or loads exceeding the rated twenty amps at two hundred fifty volts.
Highlights
- Secure twist-lock connection prevents accidental disconnection
- UL listed safety certification ensures reliable operation
- 20 amp 250V rating supports high-power equipment
- 12 AWG three-conductor cable handles heavy current loads
- 15 foot length provides flexible placement options
Specifications
No published specifications for this item yet.
Questions about this item
Will the 12-gauge wire handle a continuous 20-amp load without overheating?
Yes, the 12/3 SJT cable is rated for 20 amps at 250 volts and is UL Listed for that sustained current.
Does the cord stay cool and quiet when powering equipment all day?
The passive cable generates no noise and minimal heat when operated within its 20-amp, 250-volt rating.
What type of outlet and device inlet are required to use this cord?
You need a NEMA L6-20R receptacle on the supply side and a NEMA L6-20P inlet on the equipment.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



