We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black OBDII diagnostic cable with green PCB and toggle switch, two-metre USB connector

TAURKENAM

TAURKENAM K+DCAN OBDII Diagnostic Cable with Switch 2M

SKU CH-YTYN-2NMTE

OBD-II diagnostic cable with K-line and D-CAN switch for BMW models from 1998 to 2020, using FT232RQ chip on green PCB

  • Typetype
  • Full diagnostics for BMW models 1998-2020
  • Stable switch selects K-line or D-CAN
  • Green PCB with FT232RQ chip tested at 100%
  • Supports N54, N55, N55E, S55, B58, N13 engines
  • Windows 7/8/10/XP only; no iOS support

BMW K+DCAN Diagnostic Cable

The TAURKENAM K+DCAN OBDII cable connects a laptop to BMW vehicles built between 1998 and 2020. It uses an FT232RQ chip on a green PCB and includes a hardware switch that selects between the K-line and D-CAN protocols. The 2 metre USB cable is tested before shipment.

Windows-only workshops and Android MHD users

Technicians who need dealer-level functions such as coding, adaptations and SSS programming on supported BMW engines will find the cable covers the required protocols. It does not run on macOS, Linux or iOS, so Apple users and mobile-only diagnosticians must choose a different interface.

FT232RQ chip with protocol switch

The FT232RQ USB-to-serial controller drives both K-line and D-CAN lines through a physical toggle, enabling full EDIABAS and INPA communication on N54, N55, N55E, S55, B58 and N13 engines. Antivirus software may flag the installer, so it must be disabled during setup.

Highlights

  • Full diagnostics for BMW models 1998-2020
  • Stable switch selects K-line or D-CAN
  • Green PCB with FT232RQ chip tested at 100%
  • Supports N54, N55, N55E, S55, B58, N13 engines
  • Windows 7/8/10/XP only; no iOS support

Specifications

Typetype

Questions about this item

What OBD-II port and USB connector does the TAURKENAM K+DCAN cable use for BMW diagnostics?

The cable plugs into the vehicle 16-pin OBD-II socket and terminates in a standard USB-A plug with an FT232RQ chip; a USB-C adapter is required for devices that only have USB-C ports.

Which driver must be installed before connecting the TAURKENAM K+DCAN cable on Windows 10?

Install the FTDI FT232RQ virtual COM-port driver first, then set the cable switch to the K-line or D-CAN position before launching INPA, EDIABAS or MHD Flasher; anti-virus software may flag the installer and should be paused.

Will the TAURKENAM K+DCAN cable still work if the green PCB or FT232RQ chip fails after extended use?

The green PCB and FT232RQ chip are not user-serviceable; a failure requires replacing the entire cable assembly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.