We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular diagnostic box with OBDII port banana plugs and DB25 connector dark finish

TAURKENAM

TAURKENAM GT100+ Advanced OBD CAN Bench Testing Car Electronics Accessory

SKU CH-9T06-H5HCV

OBDII breakout box powers ECUs on the bench, tests CAN BUS and K-LINE on pins 1, 9, 3, 11, 12, 13, 8, and shows current via banana plugs

  • Typetype
  • Bench-power an ECU for diagnostics and security work with included adapter or vehicle OBDII port
  • Test CAN BUS and K-LINE protocols on standard and non-standard OBD2 pins 1, 9, 3, 11, 12, 13, 8
  • Verify communication, power and grounds before connecting expensive scan tools to prevent damage
  • Connect via banana plug or DB25 connector while monitoring live current draw on display
  • New condition GT100+ advanced OBD CAN bench testing accessory for automotive electronics diagnostics

ECU bench testing tool

The TAURKENAM GT100+ is an OBDII breakout box that powers an ECU on the bench or in the vehicle using the included power adapter or the OBDII port. It supports diagnostics, immobiliser work and security functions for professional technicians and advanced hobbyists.

Pre-use verification checklist

Before connecting a scan tool, use the GT100+ to confirm that the communication networks are active and that power and ground are present at the connector. The unit checks all standard OBDII pins plus non-standard pins 1, 9, 3, 11, 12, 13 and 8 to prevent damage to expensive diagnostic equipment.

Sustained-load behaviour

The breakout box connects to the ECU module via banana plugs or a DB25 connector and displays the electronic current value in real time. This continuous readout lets you monitor circuit health throughout extended bench sessions rather than relying on a momentary check.

Highlights

  • Bench-power an ECU for diagnostics and security work with included adapter or vehicle OBDII port
  • Test CAN BUS and K-LINE protocols on standard and non-standard OBD2 pins 1, 9, 3, 11, 12, 13, 8
  • Verify communication, power and grounds before connecting expensive scan tools to prevent damage
  • Connect via banana plug or DB25 connector while monitoring live current draw on display
  • New condition GT100+ advanced OBD CAN bench testing accessory for automotive electronics diagnostics

Specifications

Typetype

Questions about this item

Does the GT100+ come with a power adapter for bench testing or do I need to buy one separately?

The GT100+ includes a power adapter for bench use and also draws power from the vehicle OBDII port when connected in the car.

Which OBDII pins does the GT100+ test beyond the standard protocol?

It checks all standard pins plus non‑standard pins 1, 3, 8, 9, 11, 12 and 13 for CAN BUS and K‑LINE communication.

How does the current display help when I connect an ECU on the bench?

The built‑in display shows the electronic current value in real time so you can confirm the cable connection and power integrity before plugging in a scan tool.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.