We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular PoE splitter with RJ45 port and attached Micro USB to USB-C adapter cable

TAURKENAM

TAURKENAM Gigabit PoE Splitter 5V 3A 2-in-1 USB-C Micro USB Adapter

SKU CH-RMDN-T1ZPF

Splits a single Ethernet cable into gigabit data and 5 V 3 A power for Micro USB or USB-C devices

  • TypeEthernet Adapter
  • Delivers power and data over a single cable for devices without nearby outlets
  • Gigabit RJ45 ports handle 10/100/1000 Mbps speeds for fast network links
  • IEEE 802.3af/at compliant PoE ensures safe 5V 3A output with built-in protection
  • 2-in-1 Micro USB and USB-C adapter fits Raspberry Pi, IP cameras, tablets and smart home gear
  • Plug-and-play design converts Micro USB to USB-C instantly with no configuration needed

2-in-1 Gigabit PoE Splitter for USB-C and Micro USB

This adapter converts Power over Ethernet into 5V 3A output while passing 10/100/1000 Mbps data through a single RJ45 cable. It targets Raspberry Pi boards, IP cameras, tablets and smart-home devices that lack native PoE support. The integrated Micro USB to USB-C converter lets you switch between the two device ports without extra dongles. Overvoltage, short-circuit and overcurrent protection are built in.

Check your PoE source

You need an IEEE 802.3af or 802.3at compliant PoE switch or injector to feed the splitter. The connected device must accept 5V 3A via either Micro USB or USB-C. Verify that your Ethernet cabling supports Gigabit speeds if you require 1000 Mbps throughput. The unit is indoor-rated only; outdoor installations need a weatherproof enclosure.

Replaces separate PoE injector plus USB power brick

A single Ethernet run now delivers both data and regulated 5V power, removing the need for a nearby mains socket and a dedicated USB charger. The jump is worthwhile when deploying Raspberry Pi clusters, ceiling-mounted cameras or access points where AC wiring is impractical. It does not suit devices that demand higher voltages or proprietary PoE standards.

Highlights

  • Delivers power and data over a single cable for devices without nearby outlets
  • Gigabit RJ45 ports handle 10/100/1000 Mbps speeds for fast network links
  • IEEE 802.3af/at compliant PoE ensures safe 5V 3A output with built-in protection
  • 2-in-1 Micro USB and USB-C adapter fits Raspberry Pi, IP cameras, tablets and smart home gear
  • Plug-and-play design converts Micro USB to USB-C instantly with no configuration needed

Specifications

TypeEthernet Adapter

Questions about this item

Does the splitter come with an Ethernet cable or a PoE injector, or must they be purchased separately?

The package includes the 2-in-1 PoE splitter with its attached Micro USB lead and the USB-C adapter. A Cat 5e or better Ethernet cable and an IEEE 802.3 af/at PoE switch or injector are required but not supplied.

Should I use the Micro USB port or the USB-C adapter for a Raspberry Pi 4B?

Use the included USB-C adapter on the Micro USB output; the Pi 4B requires a USB-C power connection and the adapter converts the splitter’s Micro USB port to USB-C.

What does the 10/100/1000 Mbps rating mean for actual throughput on my network?

The RJ45 ports negotiate at 10, 100 or 1000 Mbps, so a Gigabit PoE switch will deliver full line-rate data while the splitter provides 5 V 3 A to the attached device.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.