We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular network adapter with black casing and labelled Ethernet ports plus a 5.5x2.1mm DC power plug

TAURKENAM

TAURKENAM Gigabit PoE Splitter 12V 2A 5.5x2.1mm DC Plug

SKU CH-GBP8-2QGPD

Splits gigabit PoE into 12 V 2 A DC power via 5.5×2.1 mm plug with 1500 V isolation and IEEE 802.3 af/at compliance

  • TypeAccessories
  • Delivers 12V 2A power to non-PoE devices
  • Gigabit data rates up to 1000Mbps over Ethernet
  • Compliant with IEEE 802.3 af/at PoE standards
  • 1500V isolation plus short-circuit and over-voltage protection
  • Auto-detects 44V-57V input from PSE equipment

Gigabit PoE Splitter 12V 2A Output

This TAURKENAM splitter separates power and data from a single Ethernet cable to run non-PoE devices. It delivers 12V at 2A through a 5.5x2.1mm DC plug while passing Gigabit network traffic. The unit complies with IEEE 802.3 af and IEEE 802.3 at standards for up to 30W input.

Check your PSE voltage and device polarity

Verify that your power sourcing equipment supplies between 44V and 57V, as the splitter automatically detects within that range. Confirm the connected device accepts a 5.5mm outer diameter and 2.1mm inner diameter barrel connector with centre-positive polarity. Ensure the Ethernet run does not exceed the standard 100 metre limit for copper cabling.

Replaces separate injector and power brick

The adapter replaces a mid-span injector plus an external AC supply for cameras, access points or IoT sensors that lack native PoE. The jump is worth it when you need 1500V isolation protection and short-circuit or overvoltage safeguards on a single compact unit. It is not suited for devices requiring voltages other than 12V or currents above 2A.

Highlights

  • Delivers 12V 2A power to non-PoE devices
  • Gigabit data rates up to 1000Mbps over Ethernet
  • Compliant with IEEE 802.3 af/at PoE standards
  • 1500V isolation plus short-circuit and over-voltage protection
  • Auto-detects 44V-57V input from PSE equipment

Specifications

TypeAccessories

Questions about this item

Does the splitter come with the Ethernet cables and the 5.5×2.1 mm DC lead, or do I need to buy them separately?

The unit provides a PoE input port and a 12 V 2 A output on a 5.5×2.1 mm barrel connector; Ethernet patch leads and any extra DC extension cable are not included.

The description lists IEEE 802.3 af and at — which one should I choose for a 12 V 2 A camera?

Both standards are supported; the splitter accepts 44–57 V from any 802.3 af (15 W) or 802.3 at (30 W) source and delivers 12 V at up to 2 A.

What does the 10/100/1000 Mbps rating mean when the splitter is connected to a Gigabit switch and a 100 Mbps camera?

The PoE port negotiates 10, 100 or 1000 Mbps, so a Gigabit switch runs at 1000 Mbps while the camera link operates at its native 100 Mbps without bottleneck.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.