We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small white rectangular PoE injector with two RJ45 ports

TAURKENAM

TAURKENAM Gigabit PoE Injector Adapter 802.3af 48V

SKU CH-XEWP-B8AG3

Converts a non-PoE Gigabit port to IEEE 802.3af PoE for devices up to 100 meters away with plug-and-play setup

  • TypeAccessories
  • Powers compatible devices up to 100 metres using IEEE 802.3af standard
  • Delivers full-duplex Gigabit Ethernet speeds across both input and output ports
  • Built-in protection against over-current, over-load, over-voltage and interference
  • Plug-and-play operation requires no software or configuration
  • Works with 48 V PoE cameras, phones and wireless access points

Gigabit PoE injector for 802.3af devices

This TAURKENAM adapter converts a standard Gigabit Ethernet port into a Power-over-Ethernet port compliant with IEEE 802.3af. It delivers both data and 48V power over a single cable to compatible devices such as IP cameras, VoIP phones or wireless access points up to 100 meters away.

Installers needing a single-port PoE solution

The injector suits installers adding one PoE device to an existing non-PoE network without deploying a full PoE switch. It is not for networks requiring 802.3at PoE+ power budgets, multi-port injection, or devices that demand more than the 802.3af standard allows.

IEEE 802.3af compliance at 48V

The decisive specification is 802.3af compliance at 48V, which determines whether your PoE device will power up correctly. Verify that the endpoint device is rated for 802.3af before purchase.

Highlights

  • Powers compatible devices up to 100 metres using IEEE 802.3af standard
  • Delivers full-duplex Gigabit Ethernet speeds across both input and output ports
  • Built-in protection against over-current, over-load, over-voltage and interference
  • Plug-and-play operation requires no software or configuration
  • Works with 48 V PoE cameras, phones and wireless access points

Specifications

TypeAccessories

Questions about this item

What non-PoE Gigabit switch or router port do I need to power this injector?

Connect the injector's RJ45 input to any standard Gigabit Ethernet port on a switch or router that does not already supply PoE.

Will my existing Cat5e or Cat6 cable runs work with this injector at full Gigabit speed?

Yes, the injector supports 10/100/1000 Mbps over existing Cat5e or better cabling up to 100 metres (328 ft).

How can I confirm the injector is delivering 48 V PoE to my IP camera after plugging it in?

The camera will power on and establish a network link; the injector's status LEDs will show active power and data connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.