We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white PoE injector with two RJ45 ports

TAURKENAM

TAURKENAM Gigabit PoE Injector 48V 24W 100m

SKU CH-Z0NS-AYP39

IEEE 802.3af compliant PoE injector delivers up to 24W of power and Gigabit data to devices up to 100 metres away via a single cable

  • TypeAccessories
  • IEEE 802.3af compliant power delivery up to 24 watt
  • Gigabit input and PoE+ output provide full duplex 2Gbps throughput
  • Converts a non-PoE port to PoE+ for devices up to 100 meters away
  • Plug and play operation requires no configuration for quick setup
  • Built-in over current, overload, over voltage and anti-interference protection

Gigabit PoE injector for remote devices

The TAURKENAM Gigabit PoE Injector adds IEEE 802.3af Power over Ethernet to a standard network link. It supplies up to 24 watt at 48 volts to a compatible access point, camera or VoIP phone. A single Gigabit RJ-45 input and a PoE+ Gigabit output deliver full-duplex throughput. The unit is plug-and-play with no software configuration required.

Practical limits of the 802.3af standard

The injector complies with IEEE 802.3af and provides a maximum of 24 watt of PoE power. Connected devices must not exceed this budget or the injector will trigger its over-current and over-load protection. Data runs are specified up to 100 metres (325 feet or 328 feet) over standard twisted-pair cabling. The 10/100/1000 Mbps ports auto-negotiate speed and duplex.

Check your cabling and device power needs

Verify that the powered device accepts 48 volt 802.3af PoE and draws 24 watt or less. Ensure the Ethernet cable run between injector and device stays within the 100 metre limit using Cat5e or better wiring. Confirm the network switch or router feeding the injector has a free Gigabit RJ-45 port. The injector does not supply power to non-PoE equipment.

Highlights

  • IEEE 802.3af compliant power delivery up to 24 watt
  • Gigabit input and PoE+ output provide full duplex 2Gbps throughput
  • Converts a non-PoE port to PoE+ for devices up to 100 meters away
  • Plug and play operation requires no configuration for quick setup
  • Built-in over current, overload, over voltage and anti-interference protection

Specifications

TypeAccessories

Questions about this item

Should I choose the 24 W version or a higher wattage model for my PoE device?

This injector delivers up to 24 W at 48 V, matching the 802.3af limit. Choose it if your powered device draws 24 W or less; otherwise a higher-standard injector is required.

What does the 1000 Mbps rating mean for real-world throughput?

The single Gigabit RJ-45 input and PoE output each run at 1000 Mbps full duplex, so the link carries up to 1 Gbps of data in each direction simultaneously.

Which PoE standard does the 48 V injector follow and what power does it cap at?

It complies with IEEE 802.3af and caps the PoE output at 24 W over distances up to 100 meters (328 ft.).

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.