We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular PoE+ injector with two Ethernet ports and power cord

TAURKENAM

TAURKENAM Gigabit PoE+ Injector 30W 802.3af

SKU CH-VVMQ-MJ22W

Delivers up to 30W PoE+ power over Gigabit Ethernet to 325 feet with 1.5KV lightning protection and wall-mountable all-in-one design

  • TypeAccessories
  • Gigabit data and power over a single cable with 10/100/1000Mbps ports
  • Powers compatible devices up to 30W using the 802.3 af standard
  • Protects connected equipment from surges with 1.5KV lightning protection
  • Flexible surface or wall mounting plus side-by-side stacking for multiple units
  • All-in-one design includes a built-in power supply and grounded AC cord

Gigabit PoE+ Injector with 30 W Output

This injector delivers up to 30 W of power over a single Ethernet cable while passing gigabit data at 10/100/1000 Mbps. It complies with the 802.3 af standard and includes 1.5 kV lightning protection for connected equipment. A built-in power supply and grounded AC cord create an all-in-one unit that requires no external adapter.

Installers needing one powered port.

The device suits technicians who need to add PoE to a single access point, IP camera or VoIP phone without deploying a managed switch. It mounts on a wall or surface and multiple injectors can be slotted side-by-side in a cabinet. Buyers who require several powered ports from one chassis should consider a dedicated PoE switch instead.

30 W PoE budget decides device compatibility

The injector supplies a maximum of 30 W per port, so any connected device must draw 30 W or less to operate reliably. Equipment requiring higher power, such as pan-tilt-zoom cameras with heaters or multi-radio access points, will not start on this unit. Verify the powered device’s stated consumption before purchasing.

Highlights

  • Gigabit data and power over a single cable with 10/100/1000Mbps ports
  • Powers compatible devices up to 30W using the 802.3 af standard
  • Protects connected equipment from surges with 1.5KV lightning protection
  • Flexible surface or wall mounting plus side-by-side stacking for multiple units
  • All-in-one design includes a built-in power supply and grounded AC cord

Specifications

TypeAccessories

Questions about this item

How much power does the TAURKENAM Gigabit PoE+ Injector draw when running continuously?

The injector delivers up to 30W of power over Ethernet to the connected device and uses a built-in power supply with an included grounded AC cord for its own operation.

What cabling and devices must I already have to use this injector?

You need a standard Ethernet cable for the uplink port and another for the PoE port, plus a PoE-compatible device such as an access point or camera that accepts 802.3af power.

Will this injector work with older 10/100 Mbps network gear I still use?

Yes, both the PoE port and the uplink port operate at 10/100/1000Mbps, so they negotiate down to 10 or 100 Mbps automatically when connected to legacy equipment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.