We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
TAURKENAM Gigabit PoE injector, desktop unit with Ethernet ports and power input

TAURKENAM

TAURKENAM Gigabit PoE Injector 30W 328ft

SKU CH-212W-HZJEP

Converts a non-PoE Gigabit port to PoE+ delivering up to 30 W over 328 ft with plug-and-play 802.3 af/at compliance

  • Convert a non-PoE 1Gbps port to PoE for devices up to 328ft away
  • Gigabit Ethernet input and PoE Gigabit output at 10/100/1000Mbps for up to 2Gbps throughput
  • Delivers up to 30W of power to PoE+ devices over Ethernet
  • Plug-and-play installation with no configuration required
  • Compliant with IEEE 802.3af/at PoE standards for broad device compatibility

Gigabit PoE+ Injector 30W

This injector adds up to 30W of Power over Ethernet to a single Gigabit port, letting you run IP cameras, VoIP phones or wireless access points without a local power outlet. It converts a standard 1Gbps link into a PoE-enabled link while keeping full 10/100/1000Mbps throughput in both directions. The unit is IEEE 802.3af/at compliant and UL certified for safe desktop use.

Upgrade from non-PoE switch or midspan

If your current switch lacks PoE ports, this injector is the simplest way to power one remote device up to 328ft away without running new cabling or replacing the switch. The jump is worth it when you have a single PoE device in a location where AC power is impractical and you want to keep Gigabit speeds end to end.

Check cabling and device class before ordering

Verify that the remote device accepts 802.3af or 802.3at power and that your Ethernet cable run does not exceed 328ft, as longer runs will drop link speed or power delivery. Ensure you have a free Gigabit uplink on the switch side and that the injector’s desktop form factor fits the intended mounting location.

Highlights

  • Convert a non-PoE 1Gbps port to PoE for devices up to 328ft away
  • Gigabit Ethernet input and PoE Gigabit output at 10/100/1000Mbps for up to 2Gbps throughput
  • Delivers up to 30W of power to PoE+ devices over Ethernet
  • Plug-and-play installation with no configuration required
  • Compliant with IEEE 802.3af/at PoE standards for broad device compatibility

Specifications

No published specifications for this item yet.

Questions about this item

Does the injector need a rack shelf or can it sit on a desk?

It is a desktop unit with no rack ears, so it sits on a flat surface and plugs into a standard AC outlet.

Which cable goes into the 1 Gigabit Ethernet input and which into the PoE Gigabit Ethernet output?

Connect the network switch to the input port, then run a single Ethernet cable from the output port to the IP camera or VoIP phone; the injector adds power on that same cable.

Will the internal power supply need a fan replacement after a few years?

The adapter has no moving parts, so there is no fan to wear out or replace.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.