We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TAURKENAM

TAURKENAM EPA5006GP Gigabit PoE Adapter 32.8W Black

SKU CH-XTM2-CW0S5

A single-port passive PoE adapter supplies up to 32.8 W at 54 V over Gigabit Ethernet to 100 m

  • TypeAccessories
  • Powers PoE devices up to 32.8W without separate power supplies
  • Extends network reach to 100m using a single Ethernet cable
  • Gigabit ports keep wired connections fast for access points and cameras
  • Passive 54V design works with compatible EnGenius and third-party gear
  • Single-port adapter simplifies installs in locations without mains outlets

Single-Port Gigabit PoE Adapter

The TAURKENAM EPA5006GP is a passive 54V Gigabit Power over Ethernet adapter designed to deliver both data and power over a single cable. It targets installers and network managers who need to supply up to 32.8W to PoE-compatible access points, IP cameras or VoIP phones in locations without nearby mains sockets.

Replaces Separate Injectors and Power Runs

This unit replaces the combination of a mid-span injector and a local AC outlet when the powered device sits within 100 metres of the network switch. The jump is worth it when cabling cost or building regulations make a new electrical circuit impractical and the endpoint draws no more than the rated output.

Plug-and-Play with Passive Wiring

Installation requires only two Ethernet patch cords: one from the switch to the adapter input, another from the adapter output to the powered device. No software configuration is needed. The main risk is exceeding the 32.8W budget or using cables longer than 100 metres, either of which will cause the connected device to power cycle or fail to start.

Highlights

  • Powers PoE devices up to 32.8W without separate power supplies
  • Extends network reach to 100m using a single Ethernet cable
  • Gigabit ports keep wired connections fast for access points and cameras
  • Passive 54V design works with compatible EnGenius and third-party gear
  • Single-port adapter simplifies installs in locations without mains outlets

Specifications

TypeAccessories

Questions about this item

What cable length does the EPA5006GP support for power delivery?

The adapter extends power and data up to 328 ft or 100 m over a single Ethernet cable.

Which Ethernet ports are used to connect the EPA5006GP inline?

Connect the network source to the Gigabit Ethernet in port, then run the out port to the powered device; reversing them is the common mistake.

How often should the EPA5006GP be replaced under normal use?

Passive PoE adapters have no moving parts; replace only if the unit fails to deliver 32.8 W or the Ethernet ports stop linking.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.