We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 14 AWG SJO power cord 9 ft with moulded 1-15P plug and rubber boot

TAURKENAM

TAURKENAM EC142 14 AWG 125V 15A 9 ft power adapter

SKU CH-NS8N-ACXMR

A 14 AWG, 9 ft SJO cord rated 125 V, 15 A and 1875 W with UL/CUL approval

  • Rated for 1875 watts at 125 volts and 15 amps
  • 14 AWG gauge with 300 volt insulation rating
  • UL and CUL approved for safety compliance
  • 9 foot length with rubber and jute fiber insulation
  • NEMA 1-15P plug with rubber boot protection

What this cord powers

The TAURKENAM EC142 is a 125-volt, 15-amp power cord rated for 1875 watts. It suits appliances and office equipment that draw up to that load from a standard North American outlet.

Installation and common issues

The moulded 1-15P plug inserts directly into a two-prong receptacle. The 14 AWG SJO rubber-jute jacket resists abrasion but remains stiff in cold temperatures, so allow slack when routing.

Limits of the 1-15P interface

The two-wire, ungrounded design cannot serve devices that require an equipment-grounding conductor. Maximum insulation rating is 300 volts, and the nine-foot length defines the reach from outlet to appliance.

Highlights

  • Rated for 1875 watts at 125 volts and 15 amps
  • 14 AWG gauge with 300 volt insulation rating
  • UL and CUL approved for safety compliance
  • 9 foot length with rubber and jute fiber insulation
  • NEMA 1-15P plug with rubber boot protection

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the 14 AWG cord is delivering 125 V and 15 A after I plug it in?

Use a multimeter at the outlet end to verify 125 V under load, then measure current draw on the circuit to ensure it stays at or below 15 A and 1875 W.

What comes in the sleeve and what must I supply myself?

The sleeve contains the 9 ft 14 AWG SJO cord with a moulded 1-15P plug and rubber boot; you must provide the outlet and any device you intend to power.

Which version of the EC142 should I choose for a 125 V 15 A application?

The single listed version — 14 AWG, 9 ft, 125 V, 15 A, UL/CUL approved — matches those requirements exactly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.