TAURKENAM
TAURKENAM Cord Cover Kit 392.5in 25×15.7in White
A 392.5-inch white PVC cord cover kit with 25 channels, snap-on fittings and self-adhesive backing hides 2-3 wires per run
- Hides 2-3 wires with 0.95 x 0.55 in channel
- 5 in total length from 25 x 15.7 in pieces
- Flame-retardant PVC with strong self-adhesive backing
- Includes 6 couplings, 4 flat elbows, 2 T-connectors, 2 inside and 2 outside elbows
- Snap-on fittings allow quick installation around any corner
Kit Contents and Purpose
The TAURKENAM cord cover kit supplies 25 white PVC channels each measuring 15.7 inches for a combined run of 392.5 inches. It includes six couplings, four flat elbows, two T-connectors, two inside elbows and two outside elbows to route cables around corners and junctions. The raceway hides two to three wires and suits home, office or entertainment venues where loose cables create clutter.
Upgrade from Loose or Taped Cables
This system replaces adhesive tape, zip ties or exposed trunking that cannot negotiate corners cleanly. The snap-on fittings and pre-formed elbows make the jump worthwhile when cables must follow skirting boards, door frames or ceiling lines without visible gaps. Builders who need to conceal larger bundles or route cables through plaster will find the 0.95 by 0.55 inch channel too small.
Adhesive Mounting Limits
A strong self-adhesive backing attaches the channels directly to painted drywall, plaster or wood. The bond relies on surface cleanliness and flatness; dust, texture or moisture can reduce holding power over time. The PVC material is flame retardant but the kit supplies no mechanical fixings, so installers must assess whether the adhesive alone meets local building codes for permanent cable management.
Highlights
- Hides 2-3 wires with 0.95 x 0.55 in channel
- 5 in total length from 25 x 15.7 in pieces
- Flame-retardant PVC with strong self-adhesive backing
- Includes 6 couplings, 4 flat elbows, 2 T-connectors, 2 inside and 2 outside elbows
- Snap-on fittings allow quick installation around any corner
Specifications
No published specifications for this item yet.
Questions about this item
What wall space does each 15.7in channel cover?
Each 15.7in channel covers a 15.7in run; 25 channels give 392.5in total and measure 0.95in wide by 0.55in high.
How do I attach the channels and fittings to the wall?
Peel the self-adhesive backing, press the channel onto a clean dry wall, then snap the 6 couplings, 4 flat elbows, 2 T-connectors, 2 inside elbows and 2 outside elbows onto the channels.
When should I replace the adhesive or the PVC channel?
Replace a channel if the PVC cracks, discolours or loses its flame-retardant rating; replace the adhesive if a channel peels away from the wall.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



