We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact USB OBD-II scan tool with MS-CAN switch, black plastic housing

TAURKENAM

TAURKENAM BF32302 USB OBD-II Scan Tool FORScan HS-CAN/MS-CAN car electronics accessory

SKU CH-YVXY-EXA1M

USB OBD-II scan tool with 500 kbit/s constant speed and MS-CAN switch for Ford and Mazda vehicles from 1996, supporting FORScan and FoCCCus software

  • Typetype
  • USB OBD-II scan tool with constant 500 kbit/s data rate
  • MS-CAN switch enables Ford and Mazda module access
  • Works with FORScan, FoCCCus and FF2 software on Windows
  • Covers Ford and Mazda cars and light trucks from 1996
  • Modified FTDI chip avoids low-quality clone reliability issues

USB OBD-II Scan Tool for Ford/Mazda

The TAURKENAM BF32302 is a USB OBD-II scan tool built around a modified FTDI chip. It connects a Windows computer to the diagnostic port on Ford and Mazda vehicles from 1996 onwards. The adapter runs at a constant 500 kbit/s and includes an MS-CAN switch for broader module access. Instructions for bbflyFORScan, FoCCCus and FF2 software are supplied.

DIY owners and independent technicians.

This tool suits owners and independent technicians who work on Ford or Mazda cars and light trucks and need dealer-level configuration, live data and module programming. It is not for technicians who service other vehicle brands, nor for users who require wireless connectivity or support for protocols outside HS-CAN and MS-CAN.

Modified FTDI chip with MS-CAN switch

The decisive specification is the modified FTDI chip combined with the hardware MS-CAN switch. Together they deliver the stable 500 kbit/s communication and dual-bus access that bbflyFORScan, FoCCCus and FF2 require for full Ford and Mazda diagnostics. Without this specific chip and switch combination, the software cannot perform configuration changes or module programming on these vehicles.

Highlights

  • USB OBD-II scan tool with constant 500 kbit/s data rate
  • MS-CAN switch enables Ford and Mazda module access
  • Works with FORScan, FoCCCus and FF2 software on Windows
  • Covers Ford and Mazda cars and light trucks from 1996
  • Modified FTDI chip avoids low-quality clone reliability issues

Specifications

Typetype

Questions about this item

Does the USB connector or the FTDI chip on the BF32302 wear out and need replacing after long-term use?

The BF32302 uses a modified FTDI chip and a standard USB interface; neither component has a stated service interval, so replacement is only needed if physical damage occurs.

What is the first limitation I will hit when running FORScan on HS-CAN or MS-CAN for hours with this adapter?

The adapter maintains a constant 500 kbit/s data rate, so sustained sessions are limited by that bus speed rather than by the device itself.

How much heat or power draw should I expect from the BF32302 when it stays plugged into the OBD-II port all day?

The BF32302 draws power directly from the vehicle OBD-II port and runs at 500 kbit/s; it produces minimal heat and no audible noise during continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.