We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black PoE splitter box with Ethernet ports and adjustable voltage switch

TAURKENAM

TAURKENAM Active PoE Splitter Adapter 802.3af 100m 5V 12V

SKU CH-8RZJ-3BAKK

Converts non-PoE cameras to Power over Ethernet with adjustable 5V, 9V and 12V output up to 100 metres

  • TypeAccessories
  • Converts non-PoE cameras to PoE support
  • Adjustable DIP switch for 5V, 9V, 12V output
  • Works up to 100 meters over Ethernet
  • Fast Ethernet speeds in compact design
  • Interchangeable tips included for camera compatibility

Active PoE Splitter for Non-PoE Cameras

This adapter converts non-PoE cameras to Power over Ethernet support using IEEE 802.3af compliance. It delivers adjustable 5V, 9V, or 12V output via a DIP switch. Interchangeable tips are included for compatibility with Wireless Amcrest and Foscam cameras.

Fast Ethernet Distance Limit

The device operates at Fast Ethernet speeds up to 100 meters over standard network cabling. This distance limit defines the maximum cable run between the power sourcing equipment and the splitter. Network performance is constrained by the Fast Ethernet standard used.

12V Output Capacity and Headroom

The splitter provides up to 12V adjustable output to power connected cameras without a local power outlet. It comfortably handles compatible Wireless Amcrest and Foscam cameras within the 802.3af power budget. It cannot support devices requiring higher voltage or power levels beyond the standard.

Highlights

  • Converts non-PoE cameras to PoE support
  • Adjustable DIP switch for 5V, 9V, 12V output
  • Works up to 100 meters over Ethernet
  • Fast Ethernet speeds in compact design
  • Interchangeable tips included for camera compatibility

Specifications

TypeAccessories

Questions about this item

Should I pick the 5V or 12V setting for my camera?

Use the DIP switch to match your camera's required voltage; the adapter offers 5V, 9V and 12V outputs and works with Amcrest and Foscam wireless models.

What does the 100 metre figure mean when the splitter is installed?

It is the maximum cable run from the PoE switch to the splitter while still delivering power and Fast Ethernet data to the camera.

How does the 802.3af standard limit what this splitter can deliver?

The 802.3af input caps available power at roughly 12 watts, so the splitter can only run cameras that stay within that budget at 5V, 9V or 12V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.