We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black NEMA 6-20P male plug to 6-20R/6-15R female receptacle adapter cord, three feet long

TAURKENAM

TAURKENAM 885736 NEMA 6-20P to 6-20R/6-15R power adapter 3FT

SKU CH-WYBK-BTGPN

A 3 ft NEMA 6-20P to 6-20R/6-15R adapter with 12 AWG copper conductors rated for 250 V and 20 A

  • Connects 6-20P equipment to 6-20R or 6-15R outlets
  • Handles up to 5000 W at 250 V for high-power devices
  • 12 AWG SJTW cord rated for 20 A continuous load
  • 100 % copper conductors with electro-plated terminals resist oxidation
  • Three-foot length gives flexible placement without excess slack

Power adapter for 250 V equipment

This TAURKENAM adapter connects a NEMA 6-20 plug to a 6-20 receptacle that also accepts a 6-15 plug. It is built for 250 volt circuits and rated at 5000 watts. The three-foot length suits rack or bench setups where the outlet sits close to the device.

20 A continuous rating on 12 AWG SJTW cable

The cord uses 12 AWG SJTW wire with 100 percent copper conductors. That gauge supports the full 20 amp rating without voltage drop on the 3 foot run. Electroplated copper terminals resist oxidation so the connection stays reliable over repeated mating cycles.

Sustained 5000 W delivery without derating

Because the conductors are sized for 20 amps at 250 volts, the adapter delivers its rated 5000 watts continuously. It does not rely on short-term surge capacity. Builders who need a longer reach or a different receptacle configuration will need a separate cord.

Highlights

  • Connects 6-20P equipment to 6-20R or 6-15R outlets
  • Handles up to 5000 W at 250 V for high-power devices
  • 12 AWG SJTW cord rated for 20 A continuous load
  • 100 % copper conductors with electro-plated terminals resist oxidation
  • Three-foot length gives flexible placement without excess slack

Specifications

No published specifications for this item yet.

Questions about this item

How much power can this adapter actually deliver to a 250 V tool or appliance?

The cord is rated for 5000 W at 250 V, so it will supply the full 20 A load without voltage drop on the 12 AWG copper conductors.

Does the 6-20 receptacle accept a standard 6-15 plug as well as a 6-20 plug?

Yes, the female end is a T-blade 6-20R that also mates with a 6-15P plug, giving you compatibility with both 20 A and 15 A 250 V equipment.

Will the 3 ft length and SJTW jacket reach a wall outlet from a floor-mounted machine?

The three-foot SJTW 12 AWG cord is flexible and rated for hard-service use, so it bridges a short gap between a wall receptacle and nearby equipment.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.