We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled 80-foot three-conductor cable with red green white PVC insulation

TAURKENAM

TAURKENAM 80 Feet 24 Meter 3 Pin LED Extension Wire 20 AWG power adapter

SKU CH-KC5A-FHA84

80-foot 20 AWG three-conductor cable extends addressable LED strips such as WS2811 and WS2812B with tin-plated copper conductors and flame-retardant PVC insulation

  • 80 ft length covers large interior LED runs
  • 20 AWG tin-plated copper keeps resistance low
  • UL listed construction meets recognised safety standard
  • Three conductor layout suits WS2811, WS2812B and SK6812 strips
  • Flame retardant PVC insulation resists heat and oxidation

Indoor LED Extension Wire

This 80 foot 20 AWG three conductor cable is built for interior hookup of addressable LED strips such as WS2811, WS2812, WS2812B, 1903 and SK6812. It also supports CCT dual colour strips that use three solder pads on the PCB. The tin plated copper strands resist oxidation and the PVC insulation is flame retardant for safe indoor runs.

Installers wiring pixel tape indoors

The wire is not rated for outdoor exposure, so exterior projects should use a different cable. Builders who need a two conductor connection for single colour strip or a heavier gauge for long high current runs will not be served by this 20 AWG construction. The three colour cores match the data, power and ground pads on compatible strips.

Simple soldering with tin plated cores

Each conductor uses multi stranded 21 by 0.178 or 26 by 0.16 tin plated copper that takes solder cleanly and shows a silver surface while the core remains pure copper. The flexible PVC jacket strips easily but the cable is only marked for 300 volt 80°C service, so it must stay inside low voltage LED circuits. No connectors are included, so plan for solder joints or crimp terminals at each end.

Highlights

  • 80 ft length covers large interior LED runs
  • 20 AWG tin-plated copper keeps resistance low
  • UL listed construction meets recognised safety standard
  • Three conductor layout suits WS2811, WS2812B and SK6812 strips
  • Flame retardant PVC insulation resists heat and oxidation

Specifications

No published specifications for this item yet.

Questions about this item

What type of LED strip do I need so the three conductors on this 20 AWG wire match its soldering pads?

The wire is designed for addressable strips with three pads such as WS2811, WS2812, WS2812B, 1903 or SK6812, and for CCT dual colour strips.

Can I keep my existing 12 V power supply when I extend the run with this 24 metre cable?

The cable is rated 300 V and 80 °C, so it can carry the same low voltage supply; voltage drop over 24 metres will depend on the load current.

How can I verify the conductors are genuine copper after the tin plating makes them look silver?

Strip a short section — the core beneath the tin coating is solid copper, and the wire meets UL listed 20 AWG gauge.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.