We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A silver 7ft Olympic barbell with medium knurling and rotating sleeves

TAURKENAM

TAURKENAM 7ft Olympic Barbell 45LB 1500lb Capacity Needle Bearing weight training

SKU CH-7WQA-02EMX

A 7 ft, 45 lb Olympic barbell rated to 1,500 lb with 205,000 PSI tensile strength, 28 mm shaft, 1.2 mm medium knurling, and needle-bearing sleeves for 2-inch plates

  • Heat-treated alloy steel rated at 205,000 PSI tensile strength handles 1,500 LB capacity
  • 28 mm shaft with 1.2 mm medium knurling balances grip security and hand comfort
  • Four needle bearings plus a bushing per sleeve give smooth spin for Olympic lifts
  • Friction-welded sleeves add durability and stable rotation under heavy loads
  • 6 inch overall length with 16.4 inch loadable sleeves fits all 2-inch Olympic plates

7ft Olympic Barbell 45LB 1500LB Capacity

This 7ft Olympic barbell weighs 45LB and supports up to 1500LB capacity. It is built from heat-treated alloy steel with 205000 PSI tensile strength. The bar suits serious strength training, powerlifting, and Olympic weightlifting in home or commercial gym settings.

28mm Shaft 1.2mm Knurling 2-Inch Olympic Plates

The 28mm shaft features 1.2mm medium-depth knurling for secure grip during heavy lifts. Loadable sleeves measure 16.4 inches and accept only 2-inch Olympic plates. Total length is 86.6 inches, limiting use to racks and spaces that accommodate a full-size 7ft bar.

Needle Bearing Sleeves Upgrade From Bushing Bars

Each sleeve uses 4 needle bearings plus a bushing for smooth spin during snatch and clean & jerk movements. This replaces basic bushing-only bars that lack rotation speed for Olympic lifts. The jump is worth it for lifters performing dynamic Olympic movements; static powerlifters may not need the bearing upgrade.

Highlights

  • Heat-treated alloy steel rated at 205,000 PSI tensile strength handles 1,500 LB capacity
  • 28 mm shaft with 1.2 mm medium knurling balances grip security and hand comfort
  • Four needle bearings plus a bushing per sleeve give smooth spin for Olympic lifts
  • Friction-welded sleeves add durability and stable rotation under heavy loads
  • 6 inch overall length with 16.4 inch loadable sleeves fits all 2-inch Olympic plates

Specifications

No published specifications for this item yet.

Questions about this item

Is the 45 lb 7 ft model the only version available?

The supplier lists a single 7 ft Olympic barbell weighing 45 lb with a 1500 lb capacity, 28 mm shaft and 1.2 mm knurling; no other lengths or weight variants are mentioned.

How does the 205,000 PSI tensile strength affect real-world lifting?

A 205,000 PSI rating on heat-treated alloy steel means the bar resists permanent bending under heavy loads up to the 1500 lb limit, keeping the 28 mm shaft straight during squats, deadlifts and presses.

What does the 2-inch Olympic sleeve standard cap in practice?

The 16.4-inch loadable sleeves accept any 2-inch Olympic plates; total plate weight is limited by the 1500 lb bar capacity, while four needle bearings plus a bushing per sleeve keep rotation smooth for snatch and clean & jerk.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.