We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two-foot heavy-duty power adapter cord with NEMA 6-20P male plug and 6-20R female receptacle also accepting 6-15R, 12 AWG copper wire

TAURKENAM

TAURKENAM 69571 NEMA 6-20P to 6-20R/6-15R power adapter 12 AWG 20A 250V 5000W 2FT

SKU CH-C2HC-4Y1HQ

A 2 ft heavy-duty adapter connects a NEMA 6-20 plug to a 6-20R or 6-15R receptacle using 12 AWG copper wire rated for 20 A, 250 V and 5000 W

  • Handles up to 5000 W with 12 AWG copper conductors
  • Rated for 20 A at 250 V for heavy-duty equipment
  • NEMA 6-20 plug to 6-20R and 6-15R female receptacle
  • SJTW jacketed cable built for maximum 20 A loading
  • Compact 2-foot length keeps work areas tidy

NEMA 6-20P to 6-20R/6-15R adapter

This power adapter connects a NEMA 6-20 plug to a NEMA 6-20 receptacle that also accepts a 6-15 plug. It is built for equipment requiring a 250-volt, 20-amp supply up to 5000 watts. The 12 AWG copper conductors handle the rated load without overheating. The two-foot length suits rack or bench setups where a short reach is needed.

Installation and common issues

Plug the male end into the supply outlet and insert the device plug into the female receptacle; the T-blade slot accepts both 6-20 and 6-15 plugs. Ensure the outlet circuit is rated for 20 amps and that the plug seats fully to avoid arcing. A loose connection or an undersized breaker will cause nuisance trips or heat buildup. Do not coil the cord tightly while under load.

Limits of the NEMA 6-20 interface

The adapter passes 250 volts at up to 20 amps, so any device drawing more than 5000 watts will exceed the rating. The 12 AWG cable is not rated for continuous loads above 20 amps, and voltage drop becomes noticeable on longer runs beyond this short length. It provides no ground-fault or over-current protection; the supply circuit must supply those safeguards. The receptacle is limited to NEMA 6-20 and 6-15 blade configurations only.

Highlights

  • Handles up to 5000 W with 12 AWG copper conductors
  • Rated for 20 A at 250 V for heavy-duty equipment
  • NEMA 6-20 plug to 6-20R and 6-15R female receptacle
  • SJTW jacketed cable built for maximum 20 A loading
  • Compact 2-foot length keeps work areas tidy

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the adapter is delivering the rated 20A at 250V after I plug it in?

The adapter uses 12 AWG 100% copper conductors rated for 20A continuous loading. If your connected equipment runs without tripping its breaker or overheating the cord, the adapter is performing to its 5000W specification.

What comes in the package and do I need any extra cords or connectors?

The package contains the 2-foot adapter cord with a NEMA 6-20P male plug on one end and a 6-20R/6-15R T-blade female receptacle on the other. No additional cords or connectors are required for standard 6-20 or 6-15 equipment.

Should I choose this 69571 model or a different capacity for a 20A 250V tool?

This 69571 model is built with 12 AWG copper wire rated for 20A, 250V and 5000W, matching a 20A 250V tool exactly. Select it when your device uses a 6-20P or 6-15P plug and you need a 2-foot reach.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.