We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange 50-foot extension cord with NEMA 6-20 plug and T-blade receptacle

TAURKENAM

TAURKENAM 67911 NEMA 6-20P to 6-20R/6-15R 12 AWG 250V 20A 5000W 50FT power adapter

SKU CH-E7Y3-P1J8E

A 50-foot heavy-duty extension cord with a NEMA 6-20P plug and a 6-20R/6-15R receptacle, built with 12 AWG copper wire rated for 20 amps at 250 volts and 5000 watts

  • NEMA 6-20P male connects to 6-20R and 6-15R female outlets
  • 12 AWG copper conductors deliver 20 A at 250 V for 5000 W capacity
  • SJTW 12 AWG jacket rated for maximum 20 A continuous loading
  • 100 % copper wire ensures reliable heavy-duty power transfer
  • 50 foot length provides extended reach for equipment placement

Extension cord for 20-amp 250-volt circuits

This 50-foot cord carries a NEMA 6-20 plug to a female receptacle that accepts both 6-20 and 6-15 blades. It is built for equipment that draws up to 20 amps at 250 volts, delivering a 5000-watt capacity. The 12 AWG copper conductors handle the full rated load without voltage drop over the full length. It suits workshops, garages or job sites where high-power tools need reach.

Receptacle accepts two blade types

The female end fits a standard 6-20 T-blade plug and also accommodates a 6-15 straight-blade plug. This dual compatibility lets you connect either 20-amp or 15-amp 250-volt devices without a separate adapter. The SJTW jacket resists oil, water and abrasion, so the cord survives rough floors and outdoor exposure. No extra software or configuration is involved.

Simple plug-in installation

Connect the male 6-20 plug to a matching 250-volt outlet and plug your device into the female end. Ensure the supply circuit is rated for 20 amps and protected by a 20-amp breaker. The most common issue is using the cord on a 15-amp circuit, which will trip the breaker under heavy load. Verify the outlet wiring matches the NEMA 6-20 configuration before use.

Highlights

  • NEMA 6-20P male connects to 6-20R and 6-15R female outlets
  • 12 AWG copper conductors deliver 20 A at 250 V for 5000 W capacity
  • SJTW 12 AWG jacket rated for maximum 20 A continuous loading
  • 100 % copper wire ensures reliable heavy-duty power transfer
  • 50 foot length provides extended reach for equipment placement

Specifications

No published specifications for this item yet.

Questions about this item

Will the 12 AWG copper conductors need replacement after long-term 20A use?

The 100% copper conductors are rated for the full 20A load; no scheduled replacement is required under normal conditions.

What limits continuous 20A operation on the 50FT length?

The 12 AWG SJTW cable is rated for 20A at 250V; voltage drop over 50FT is the first practical limit at maximum load.

How much heat does the cord produce when running 5000W all day?

At 20A the copper warms within its SJTW rating; the heavy-duty jacket dissipates heat so surface temperature stays safe for handling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.