We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange heavy-duty extension cord with right-angle lighted 6-50 plugs, 25 ft length

TAURKENAM

TAURKENAM 61391 6 AWG 6-50 Extension Cord 50A 250V 25FT

SKU CH-DV36-NFDJ6

A 25 ft heavy-duty 6 AWG extension cord with NEMA 6-50 connectors rated for 50 A at 250 V and 12500 W

  • Handles 50 A loads with 6 AWG stranded wire
  • 25 ft reach for flexible welder placement
  • UL & cUL listed for verified safety
  • Electroplated copper terminals resist oxidation
  • Right-angle NEMA 6-50 lighted connectors simplify hookup

25-Foot 6 AWG Welder Extension Cord

This 25-foot STW 6AWG/3C stranded-wire cord carries up to 50 amps at 250 volts for a maximum rating of 12500 watts. It uses a NEMA 6-50P plug and matching 6-50R receptacle with a lighted right-angle connector. The cord is UL and cUL listed and built with 100 percent copper conductors.

Decisive Spec: 6 AWG Stranded Copper at 50 Amps

The 6 AWG copper construction is the single figure that determines whether the cord can handle your welder’s continuous draw without overheating. A smaller gauge would limit safe current and risk voltage drop over the full 25-foot run. This cord is not for buyers who need a lighter-gauge cord for lower-amperage tools or a different NEMA configuration.

Sustained Load Behaviour

The electroplate copper terminals resist surface oxidation so resistance stays stable during long welding sessions. Heavy-duty STW jacketing and molded strain relief protect the conductors from heat and flexing when the cord is run at the full 50-amp rating for extended periods.

Highlights

  • Handles 50 A loads with 6 AWG stranded wire
  • 25 ft reach for flexible welder placement
  • UL & cUL listed for verified safety
  • Electroplated copper terminals resist oxidation
  • Right-angle NEMA 6-50 lighted connectors simplify hookup

Specifications

No published specifications for this item yet.

Questions about this item

What can the 12500 watt rating actually power on a 250 volt circuit?

At 250 volts the cord delivers up to 50 amps, so the 12500 watt rating supports welders, EV chargers or other 6-50 equipment drawing the full 50 amp load.

How does the NEMA 6-50 connector limit what I can plug in?

The 6-50P plug and 6-50R receptacle accept only 3-pole 50 amp 250 volt devices, so the cord works with any brand of welder or EVSE that uses the same 6-50 configuration.

Will the 25 foot length and right-angle ends fit my workshop layout?

The 25 foot STW 6 AWG stranded cable with right-angle lighted connectors on both ends routes easily along walls or benches without sharp bends at the outlet.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.