We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange 25-foot extension cord with 4-prong NEMA 14-30 plug and matching receptacle, heavy-duty PVC jacket

TAURKENAM

TAURKENAM 4 Prong NEMA 14-30P to 14-30R 25ft 30A 125V/250V Power Adapter

SKU CH-4CV1-Z25CD

A 25‑foot 10AWG extension cord with NEMA 14‑30 ends, rated 30A at 125V/250V for dryer or EV charging

  • Handles up to 7500 watt loads with 30 amp NEMA 14-30 connection
  • Extends dryer or EV charging reach by 25 feet without moving outlets
  • 10AWG four-conductor copper cable with STW jacket resists abrasion moisture and heat
  • PVC outer jacket stays flexible in cold weather for easy routing
  • ETL listed moulded plug and receptacle ensure a safe tested connection

30 A NEMA 14-30 extension for dryer or EV charging

This 25 ft cord carries 125V/250V at 30 A with a 7500 watt rating. It connects a 4 prong NEMA 14-30 plug to a matching receptacle. The heavy duty 10AWG/4 construction uses 100% copper conductors inside a flexible PVC jacket. It suits dryer relocation or Level 2 EV charging without moving the wall outlet.

Verify outlet type and circuit rating before use

Confirm the existing receptacle is a 4 prong NEMA 14-30 and that the branch circuit is rated for 30 A at 125V/250V. The cord is 25 ft long, equal to 7.5 m, so measure the run to ensure sufficient reach. The STW jacket is rated for outdoor use and resists abrasion, moisture and heat. The moulded plug and receptacle are ETL approved and 100% tested.

Continuous load at 30 A stays within the 7500 watt

The 10AWG copper conductors and 600 V insulation support sustained 30 A operation without overheating. The PVC jacket remains flexible during extended use while resisting environmental stress. ETL listing confirms the assembly meets safety standards for continuous duty. Ignore any length printing error on the barcode sticker; the cord supplied is the correct 25 ft length.

Highlights

  • Handles up to 7500 watt loads with 30 amp NEMA 14-30 connection
  • Extends dryer or EV charging reach by 25 feet without moving outlets
  • 10AWG four-conductor copper cable with STW jacket resists abrasion moisture and heat
  • PVC outer jacket stays flexible in cold weather for easy routing
  • ETL listed moulded plug and receptacle ensure a safe tested connection

Specifications

No published specifications for this item yet.

Questions about this item

What comes in the box and do I need any extra parts?

The package contains the 25 ft 4-prong NEMA 14-30P to 14-30R extension cord with moulded plug and receptacle. No extra components are required for dryer or Level 2 EV charging use.

Which length or gauge version should I choose for a 30 A circuit?

This model is a single 25 ft, 10 AWG/4 conductor cord rated 30 A, 125/250 V and 7500 W maximum. It matches a standard 30 A dryer or EV circuit.

What does the 7500 watt rating mean when I plug in my dryer or EV charger?

At 250 V the cord can deliver up to 7500 W continuously, so a 30 A dryer or Level 2 EV charger will run at full power without voltage drop over the 25 ft length.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.