We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four small white PoE splitters with USB-C and Ethernet ports

TAURKENAM

TAURKENAM 4-Pack 5V PoE Splitter USB-C 48V to 5V 2.4A 10/100Mbps

SKU CH-Y5E7-TE49V

Four PoE splitters convert 48V input to 5V 2.4A USB-C power with 10/100Mbps data for non-PoE devices

  • Powers USB-C devices from PoE switches
  • Delivers 5 V at 2.4 A up to 12 W
  • Carries 10/100 Mbps data alongside power
  • Works with IEEE 802.3 af 44-56 V sources
  • Four splitters included for multiple device deployments

TAURKENAM 4-Pack 5V PoE Splitter USB-C

This four-pack of 5V PoE splitters converts 48V IEEE 802.3af input from a PoE switch or injector into 5V DC at 2.4A and 10/100Mbps Ethernet data over USB-C. Each unit is plug-and-play, requiring no configuration to power compatible devices where no mains outlet exists.

Suits devices with USB-C 5V input and 10/100Mbps

These splitters work only with non-PoE devices that accept 5V DC via USB-C and have a 10/100Mbps Ethernet port. They do not support gigabit Ethernet devices, nor equipment that requires a different voltage, connector type or PoE standard.

IEEE 802.3af 44-56V input to 5V 2.4A USB-C output

The single specification that decides fit is the IEEE 802.3af compliant input range of 44-56V DC converted to a fixed 5V 2.4A USB-C output with 10/100Mbps data pass-through. Verify your source voltage and device requirements match exactly.

Highlights

  • Powers USB-C devices from PoE switches
  • Delivers 5 V at 2.4 A up to 12 W
  • Carries 10/100 Mbps data alongside power
  • Works with IEEE 802.3 af 44-56 V sources
  • Four splitters included for multiple device deployments

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the splitter to my PoE switch and the USB-C device, and which step is often missed?

Plug an Ethernet cable from the PoE switch or injector into the splitter's input port, then connect the splitter's USB-C plug to the device and its Ethernet output to the device's network port; the step often missed is confirming the switch or injector delivers IEEE 802.3af power at 44-56 V DC before connecting.

What maintenance or replacement should I plan for with these splitters?

The units are passive with no moving parts or batteries, so no routine maintenance is required; replacement would only be needed if a splitter fails or if you later upgrade to gigabit devices, since these splitters support only 10/100 Mbps Ethernet.

What is the first limit I will hit when running a device continuously from one splitter?

The 5 V 2.4 A output caps at 12 watts, so any attached device drawing more than 2.4 A will hit the power limit first; the 10/100 Mbps Ethernet link is the next ceiling if network traffic exceeds 100 Mbps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.