We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four small black PoE splitters with micro USB plugs and Ethernet ports

TAURKENAM

TAURKENAM 4-Pack 5V PoE Splitter 48V to 5V 2.4A Micro USB

SKU CH-B6DM-CNHS6

Converts 48V PoE to 5V 2.4A micro USB power with 10/100Mbps data for IP cameras, tablets or Raspberry Pi up to 100m

  • TypeUSB Wi-FI Adapter
  • Powers devices up to 100 metres from the switch
  • Delivers 5 V at 2.4 A through a micro USB plug
  • Supplies 10/100 Mbps Ethernet data alongside power
  • Works with IEEE 802.3 af PoE sources from 44 to 56 V
  • Ready to use with no configuration required

4-Pack PoE Splitter for 5V Devices

This four-pack converts IEEE 802.3af input at 44-56 V DC into 5 V DC at up to 2.4 A, 12 W maximum, with a micro USB plug and 10/100 Mbps Ethernet data pass-through. Each unit delivers power up to 100 m over standard twisted-pair cabling and requires no configuration. The splitters are new and ready for immediate deployment.

Suits 5V micro USB devices with 10/100 Ethernet.

Ideal for IP cameras, tablets, Dropcam units, Raspberry Pi boards and similar hardware that have a 5 V micro USB power input and a 10/100 Mbps Ethernet port. Buyers needing gigabit Ethernet support or devices that require a different voltage or connector should consider other options.

IEEE 802.3af 44-56 V input to 5 V 2.4 A micro USB

The defining specification is the IEEE 802.3af compliant input range of 44-56 V DC, which is stepped down to a regulated 5 V 2.4 A output on a micro USB plug while passing 10/100 Mbps data. Confirm that the target device matches this voltage, current, connector and Ethernet speed before purchase.

Highlights

  • Powers devices up to 100 metres from the switch
  • Delivers 5 V at 2.4 A through a micro USB plug
  • Supplies 10/100 Mbps Ethernet data alongside power
  • Works with IEEE 802.3 af PoE sources from 44 to 56 V
  • Ready to use with no configuration required

Specifications

TypeUSB Wi-FI Adapter

Questions about this item

Do I need a PoE switch or injector that supplies IEEE 802.3af power for these splitters to operate?

Yes, each splitter requires an IEEE 802.3af source delivering 44 to 56 V DC, typically from a PoE switch or injector, to provide the 5 V 2.4 A output.

Will these splitters pass data to a Raspberry Pi 3B+ which has a Gigabit Ethernet port?

No, the splitters only support 10/100 Mbps Ethernet, so they are incompatible with Gigabit-only devices such as the Raspberry Pi 3B+.

After connecting everything, how can I confirm the splitter is delivering the correct 5 V 2.4 A to my device?

The target device should power on and show a stable network link at 10/100 Mbps; if it boots and communicates normally, the splitter is providing the specified 5 V 2.4 A output.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.