TAURKENAM
TAURKENAM 3-Wire Appliance Power Tool Cord 6 ft 14 AWG 15A 125V 1875W Black 2pack
Two 6 ft, 14 AWG cords rated 15 A at 125 V with UL-listed vinyl jackets that withstand -40°F to 140°F for appliances and power tools
- Thick vinyl jacket resists moisture, abrasion and sunlight for outdoor durability
- 14 AWG cord handles 15 A at 125 V for 1875 W heavy-duty loads
- UL listed with three-prong grounded plug for safe appliance and tool connections
- Operates from -40 °F to 140 °F for reliable performance in extreme temperatures
- Two six-foot cords included for flexible placement of major appliances and power tools
Application Suitability
This 3-wire appliance and power tool cord handles major appliances, motors and power tools that require a U-Ground NEMA 5-15 connection. The 14 AWG conductors carry 15 amps at 125 volts for up to 1875 watts of continuous load. A pack of two cords provides spare length or dual-location coverage for workshops and utility rooms.
Sustained Load Behaviour
The thick vinyl jacket resists moisture, abrasion and prolonged sunlight exposure while operating across a -40°F to +140°F temperature range. UL listing confirms the cable meets safety standards for continuous heavy-duty use. Insulation is pre-stripped for straightforward installation and the three-prong grounded plug maintains a secure connection under vibration.
Upgrade Context
This cord replaces lighter-gauge leads that cannot sustain 15-amp draw or that lack outdoor-rated jackets. The jump is worthwhile when existing cables show cracking, stiffness in cold weather or insufficient ampacity for the connected equipment. Builders who need a single-cord solution for higher-wattage tools or longer runs should verify length requirements before purchasing.
Highlights
- Thick vinyl jacket resists moisture, abrasion and sunlight for outdoor durability
- 14 AWG cord handles 15 A at 125 V for 1875 W heavy-duty loads
- UL listed with three-prong grounded plug for safe appliance and tool connections
- Operates from -40 °F to 140 °F for reliable performance in extreme temperatures
- Two six-foot cords included for flexible placement of major appliances and power tools
Specifications
No published specifications for this item yet.
Questions about this item
Will the 14 AWG cord get hot when I run a 15 A tool all day?
The cord is rated for 15 A at 125 V and uses 14 AWG conductors, so it stays within its thermal limits during continuous full-load use.
What must my tool or appliance already have to plug into this cord?
It ends in a standard NEMA 5-15 three-prong grounded plug, so the device you connect must accept a 5-15R receptacle.
Can I use this cord with an older motor that draws high inrush current?
The 14 AWG wiring and 15 A rating handle typical motor start-up surges, and the vinyl jacket remains flexible down to -40 °F.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



