We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey 3-prong dryer cord with right-angle plug, four feet long

TAURKENAM

TAURKENAM 3-Prong Dryer Cord 4 Ft 10/3 SRDT 30A NEMA 10-30 Gray

SKU CH-E9PK-0FHP8

A 4 ft, 10-gauge dryer cord with a right-angle NEMA 10-30 plug rated for 30 A at 125/250 V

  • Fits pre-1996 dryer outlets with NEMA 10-30 plug
  • Right-angle plug sits flush against wall in tight spaces
  • SRDT jacket resists moisture and prevents overheating
  • Molded ring terminals give secure, easy installation
  • ETL listed for 30 A, 125/250 V, 3750 W service

3-Prong Dryer Cord for Pre-1996 Outlets

This 4-foot TAURKENAM cord connects electric dryers to NEMA 10-30R outlets rated 30 amps at 125/250 volts. It uses a 10/3 SRDT cable rated for 3750 watts and carries an ETL listing. The three-wire design matches outlets commonly installed in buildings built before 1996. Verify your dryer manual and outlet holes before purchasing.

Right-Angle Plug Eases Tight-Space Installation

The molded right-angle plug sits flush against the wall, saving clearance behind the appliance. Molded ring terminals simplify the wiring step, and a side-grip collar lets you pull the plug straight out without straining the cable. The main risk is connecting a three-wire cord to a dryer that requires a four-wire ground; always confirm the appliance wiring first.

Three-Wire Standard Lacks Dedicated Ground

NEMA 10-30 supplies two hots and a neutral but no separate equipment ground, so the dryer chassis bonds to the neutral conductor. Modern codes require four-wire connections for new installations, and this cord cannot satisfy that requirement. The SRDT jacket resists moisture and overheating within its 3750-watt rating, but it does not add grounding where the outlet has none.

Highlights

  • Fits pre-1996 dryer outlets with NEMA 10-30 plug
  • Right-angle plug sits flush against wall in tight spaces
  • SRDT jacket resists moisture and prevents overheating
  • Molded ring terminals give secure, easy installation
  • ETL listed for 30 A, 125/250 V, 3750 W service

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the 30A NEMA 10-30 cord is working correctly after connecting the molded ring terminals to my dryer?

Verify the dryer powers on and runs a full heating cycle without the plug or cord becoming warm, indicating the 10/3 SRDT conductors and right-angle plug are delivering 125/250 V at 30 A as rated.

What components are included with this 4 ft 10/3 SRDT dryer cord and what must I supply separately?

The cord ships with a pre-attached NEMA 10-30 right-angle plug and molded ring terminals; you must provide the tools to fasten the ring terminals to the dryer terminal block and a compatible 30 A 10-30R outlet.

Which length should I choose among the 4 ft to 15 ft options for a dryer outlet located close to the appliance?

Select the 4 ft version when the outlet is near the dryer to avoid excess slack, or choose a longer 6 ft, 10 ft or 15 ft cord only if the extra reach is needed for your installation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.