We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium 12/24V charger with three USB ports, blue voltmeter and power switch

TAURKENAM

TAURKENAM 3-Port 12/24V USB Charger PD 3.0 QC 3.0 58W Aluminum Voltmeter Switch

SKU CH-C3NA-CDP27

Three-port 12/24V charger delivers 58W via dual PD 3.0 20W USB-C and QC 3.0 18W USB-A with LED voltmeter and power switch

  • TypeCharger Kit
  • All-aluminium body resists scratches and heat for lasting durability
  • Three ports deliver 58 W total with dual 20 W PD 3.0 and 18 W QC 3.0
  • Blue LED voltmeter shows real-time battery voltage while driving
  • Power switch cuts supply to ports and display preventing parasitic drain
  • Fits 12 V and 24 V systems in boats RVs motorcycles and more

Three-Port 58W Charger for 12/24V Vehicles

The TAURKENAM charger delivers 58W across three ports for drivers who need simultaneous fast charging on boats, RVs, motorcycles or trucks. Its all-aluminium body resists scratches and runs cooler than plastic alternatives, while a built-in power switch cuts phantom draw when the engine is off. The blue LED voltmeter shows real-time system voltage so you can monitor battery health at a glance. It fits any standard round 12V socket opening.

Dual 20W USB-C and Single 18W USB-A Outputs

Two PD 3.0 Type-C ports supply up to 20W each and one QC 3.0 Type-A port supplies up to 18W, all compatible with earlier PD 2.0 and QC 2.0 or 1.0 devices. The combined 58W ceiling handles a phone, tablet and dash-cam together, but total output drops if all three ports draw maximum power simultaneously. Non-fast-charge gear still receives the fastest rate each protocol allows.

Round 12V Socket Form Factor with Integrated Switch

Installation requires a standard round 12V cut-out; the unit cannot be mounted in rectangular panel openings or flush USB-only panels. The aluminium housing threads into the hole and locks with a rear nut, so panel thickness must allow the nut to engage fully. Buyers whose dash or console uses a different aperture will need an adapter or a different charger.

Highlights

  • All-aluminium body resists scratches and heat for lasting durability
  • Three ports deliver 58 W total with dual 20 W PD 3.0 and 18 W QC 3.0
  • Blue LED voltmeter shows real-time battery voltage while driving
  • Power switch cuts supply to ports and display preventing parasitic drain
  • Fits 12 V and 24 V systems in boats RVs motorcycles and more

Specifications

TypeCharger Kit

Questions about this item

Will the dual PD 3.0 20W USB-C ports charge my older phone that only supports 5V/2A?

Yes, the ports are consistent with PD 2.0 and will negotiate down to 5V/2A for non-fast-charge devices.

How do I know the LED voltage display is reading correctly after I install it?

With the engine running the blue display should show a stable voltage between 12 and 24 volts depending on your vehicle's electrical system.

Does the kit include a mounting panel or wiring harness, or must I supply them?

The charger body with integrated switch and voltmeter is supplied; a mounting panel and any wiring harness are not included and must be sourced separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.