We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small rectangular network adapters with Ethernet ports and 5.5mm DC plugs, matte black finish

TAURKENAM

TAURKENAM 2-Pack Gigabit PoE Splitter 48V to 12V 2A

SKU CH-EP9J-9GBN0

Converts 48V PoE to 12V 2A DC with Gigabit data for non-PoE cameras and access points up to 100m

  • TypeAccessories
  • Powers non-PoE devices with 12V 2A output up to 24W max
  • Gigabit Ethernet passes 10/100/1000Mbps data alongside power delivery
  • Accepts IEEE 802.3af 44-56V input from PoE switch or injector
  • Plug-and-play setup needs no configuration for quick deployment
  • Two splitters included to connect IP cameras, APs, routers or VoIP phones

2-Pack Gigabit PoE Splitter

This two-pack converts IEEE 802.3af 48V PoE into 12V DC at 2A with a 5.5mm x 2.1mm barrel connector while passing 10/100/1000Mbps data. It suits installers adding IP cameras, access points or VoIP phones where no mains outlet exists. Each unit delivers up to 24W and runs over cable runs up to 100m. No configuration is required.

Fits 12V non-PoE devices only

The splitters work with gear that accepts 12V DC and has an Ethernet port. They do not power equipment needing 24V, 48V or higher-wattage 12V loads beyond 2A. Builders using passive PoE injectors or switches without 802.3af support should choose a different solution.

5.5mm x 2.1mm barrel output

The single specification that decides fit is the 5.5mm x 2.1mm centre-positive barrel plug delivering 12V at 2A. Verify the target device uses this exact connector and voltage before purchase.

Highlights

  • Powers non-PoE devices with 12V 2A output up to 24W max
  • Gigabit Ethernet passes 10/100/1000Mbps data alongside power delivery
  • Accepts IEEE 802.3af 44-56V input from PoE switch or injector
  • Plug-and-play setup needs no configuration for quick deployment
  • Two splitters included to connect IP cameras, APs, routers or VoIP phones

Specifications

TypeAccessories

Questions about this item

What power source must I already have to run the 48V to 12V 2A splitter?

You need a PoE switch or PoE injector that delivers IEEE 802.3af power at DC 44-56V over Ethernet cable.

Will the 10/100/1000Mbps Ethernet port work with my older 100Mbps camera?

Yes, the gigabit port auto-negotiates down to 100Mbps so the camera keeps its network link while receiving 12V 2A power.

How can I confirm the 12V 2A output is live after connecting the 5.5mm x 2.1mm plug?

The target device powers on and establishes a 10/100/1000Mbps data link, showing both voltage and Ethernet are passing through.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.