We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two compact black PoE splitter units with short output cables and 5.5mm x 2.5mm DC plugs

TAURKENAM

TAURKENAM 2-Pack 12V PoE Splitter Adapter 5.5mm x 2.5mm

SKU CH-Q9QR-E33AZ

Converts 44–56V PoE to 12V 15.4W with 10/100Mbps data pass-through and 5.5×2.5mm jack

  • TypeAccessories
  • Powers 12 V devices from 44–56 V PoE
  • Delivers up to 15.4 W at 10/100 Mbps
  • Fits 5.5 mm × 2.5 mm DC jack with 200 mm lead
  • IEEE 802.3 af compliant for IP cameras, VoIP phones, APs
  • Two splitters included for dual-device installs

2-Pack 12 V PoE Splitter 5.5 × 2.5 mm

This two-pack supplies 12 V DC at up to 15.4 W to non-PoE devices from a PoE switch or injector delivering 44–56 V. Each splitter passes 10/100 Mbps data and uses a 5.5 mm × 2.5 mm barrel jack with a 200 mm output lead.

IEEE 802.3af compliant network accessory

Installers powering IP cameras, VoIP phones or wireless access points can use these splitters without separate power supplies. Builders who need Gigabit data rates, higher output wattage or a different DC connector should select another solution.

Single specification: 12 V 15.4 W 10/100 Mbps output

The splitter delivers a fixed 12 V at 15.4 W maximum while passing 10/100 Mbps Ethernet; if the target device requires a different voltage, more power or Gigabit throughput this unit will not work.

Highlights

  • Powers 12 V devices from 44–56 V PoE
  • Delivers up to 15.4 W at 10/100 Mbps
  • Fits 5.5 mm × 2.5 mm DC jack with 200 mm lead
  • IEEE 802.3 af compliant for IP cameras, VoIP phones, APs
  • Two splitters included for dual-device installs

Specifications

TypeAccessories

Questions about this item

How can I verify the splitter is delivering 12 V at 15.4 W after connecting my IP camera?

Measure the DC jack with a multimeter under load; it should read 12 V and the camera should power up while the link light shows a 10/100 Mbps connection.

What comes in the package and do I need any extra cables for a typical IP camera install?

The box contains two PoE splitters, each with a 200 mm 5.5 mm x 2.5 mm output lead; you only need a PoE switch or injector and an Ethernet cable.

Which version should I choose if my devices need 12 V and my PoE source supplies 44-56 V?

This model is the only one listed; it accepts 44-56 V input and provides a fixed 12 V 15.4 W output compliant with IEEE 802.3af.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.