We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular outdoor PoE extender with watertight connectors, wall-mount brackets, matte finish

TAURKENAM

TAURKENAM 2 Channel Gigabit Outdoor PoE Extender Switch Module

SKU CH-TDNS-V9C3E

Outdoor PoE extender powers two devices up to 30 watts each, IP67 rated for -25°C to 55°C, adds 100 metres per unit and up to 400 metres daisy-chained

  • TypeAccessories
  • Extends PoE power to two devices via outdoor gigabit network cable
  • IP67 waterproof housing with surge protection operates from -25°C to 55°C
  • Input accepts up to 60 W PoE bt/at/af; each output delivers up to 30 W at/af
  • Adds 100 m per unit; daisy-chain three for 400 m total reach
  • Wall-mount plug-and-play design needs no separate power supply

Outdoor PoE Extender for Dual Devices

This two-channel gigabit PoE extender pushes power and data to a pair of outdoor devices such as wireless access points, base stations or network cameras. It accepts a single PoE input and splits the budget across two output ports, removing the need for local mains power at the remote location. The module is built for exterior runs where standard Ethernet reach falls short.

Passive Cooling Across Extreme Temperatures

Sealed IP67 housing with watertight connectors dissipates heat without fans, operating silently from -25°C to 55°C. Integrated surge protection guards the link against transient spikes on the outdoor cable plant. The unit draws up to 60 watts from the upstream PoE source and delivers up to 30 watts per output port while maintaining gigabit throughput.

Wall-Mount Housing With Daisy-Chain Capability

Rugged brackets allow direct mounting on poles or walls, and the plug-and-play design needs no separate power supply. Each extender adds 100 metres of reach, and up to three units can be chained for a total 400-metre PoE+ extension. Watertight connectors on every port keep the link sealed, though the module must not be submerged or buried.

Highlights

  • Extends PoE power to two devices via outdoor gigabit network cable
  • IP67 waterproof housing with surge protection operates from -25°C to 55°C
  • Input accepts up to 60 W PoE bt/at/af; each output delivers up to 30 W at/af
  • Adds 100 m per unit; daisy-chain three for 400 m total reach
  • Wall-mount plug-and-play design needs no separate power supply

Specifications

TypeAccessories

Questions about this item

How do I wall-mount the PoE extender and what is the step people often miss?

Mount the unit on a vertical surface using the built-in brackets, then connect the watertight input connector to the PoE source and the two output connectors to your devices. The step most installers miss is tightening every connector until the IP67 seal clicks; a loose connector lets water in and breaks the surge protection.

What maintenance or replacement will the extender need over time?

The extender has no fan or moving parts, so routine maintenance is limited to inspecting the watertight connectors and cable glands once a year for corrosion or seal degradation. If a connector seal fails, replace the gland kit; the solid-state PoE circuitry itself does not wear out under normal -25°C to 55°C operation.

What is the first limit I will hit on a long daisy-chained run?

Each extender adds 100 m of reach, but the daisy-chain limit is three units for a total of 400 m. Beyond that the 60 W input budget cannot guarantee 30 W per output port, so voltage drop becomes the first hard constraint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.