We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black 1U vented cantilever shelves 19 inch wide 14 inch deep SPCC steel

TAURKENAM

TAURKENAM 2× 1U 19″ Vented Cantilever Shelves 14″/35 cm Black

SKU CH-2NAH-HPEPH

Two 1U vented cantilever shelves mount in 19″ racks, 14″ deep with 2.0 mm steel and included hardware

  • TypeSee Description
  • Fits all 19″ standard racks with 14″ depth
  • Vented surface speeds heat dissipation for cooler equipment
  • 0 mm SPCC steel supports devices up to 19″ wide
  • Two shelves with screws and cage nuts install in minutes
  • 1U profile at 1.78″ height saves rack space

2× 1U 19″ Vented Cantilever Shelves

This pair of 1U vented cantilever shelves fits any standard 19″ rack or cabinet. Each tray measures 14″ (35 cm) deep and is built from 2.0 mm SPCC cold-rolled steel. The perforated surface promotes airflow around network, server or audio gear. Mounting screws and cage nuts are included for quick installation.

Compatibility check before ordering

Verify that your rack uses 19″ EIA hole spacing and offers at least 1U (1.78″) of vertical clearance per shelf. Ensure the equipment you plan to place on each tray is narrower than 19″ and does not exceed the 13.8″ usable depth. Confirm the combined weight of the devices stays within the load rating of the rack uprights.

Upgrade from fixed or solid shelves

These cantilever trays replace fixed-depth or solid shelves when you need front-only mounting and better heat dissipation. The vented design suits equipment that runs warm but does not require forced-air cooling. The jump is worth it when you want tool-less depth adjustment and maximum airflow without adding fan trays.

Highlights

  • Fits all 19″ standard racks with 14″ depth
  • Vented surface speeds heat dissipation for cooler equipment
  • 0 mm SPCC steel supports devices up to 19″ wide
  • Two shelves with screws and cage nuts install in minutes
  • 1U profile at 1.78″ height saves rack space

Specifications

TypeSee Description

Questions about this item

Does the package include the mounting hardware or do I need to buy screws and cage nuts separately?

Two shelves arrive together with the required mounting screws and cage nuts in a single box, so no extra hardware is needed.

I see a 14 inch and a 35 cm depth mentioned — which one should I order for a standard 19 inch rack?

Both figures describe the same 14 inch (35 cm) deep shelf; either reference fits a standard 19 inch rack.

The spec lists a 13.8 inch usable depth — will a 14 inch deep network switch actually fit on the tray?

The tray itself is 13.8 inches deep, so equipment up to that depth sits fully supported; a 14 inch deep chassis would overhang slightly.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.