We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular OBDII breakout box with 16 gold pins and 4mm banana jacks, coloured jumper cables attached

TAURKENAM

TAURKENAM 16-Pin OBDII Breakout Box Car Electronics Accessory

SKU CH-YDVV-HC3MW

A 16-pin OBDII breakout box with 4mm banana jacks and coloured jumper cables for monitoring CAN, K-line, L-line and PWM signals during vehicle diagnostics

  • Typetype
  • 16-pin layout mirrors OBDII for quick, intuitive testing
  • 4 mm banana jacks accept any probe for flexible data access
  • Supports CAN bus, K-line, L-line and PWM protocols
  • Four coloured jumper sets let you run multiple tools at once
  • New condition ensures reliable performance from first use

16-Pin OBDII Breakout Box for Diagnostics

This TAURKENAM accessory replicates the standard 16-pin OBDII layout so technicians can monitor communication, power and ground signals without back-probing. It accepts 4 mm banana plugs on every pin and includes four coloured jumper sets for wiring multiple test tools at once. The unit supports CAN bus, K-line, L-line and PWM protocol lines on both petrol and diesel vehicles. It is intended for professional engineers and advanced hobbyists who need simultaneous access to several diagnostic devices.

Installation and Common Issues

Connection is straightforward: plug the box between the vehicle OBDII port and the scanner, then attach banana leads or jumpers to the exposed pins. The coloured jumpers let you route signals to a recorder, navigation unit or programmer without splicing wires. The only caution in the supplier data is to avoid shorting the input jacks with jumpers while the box is disconnected from a vehicle, as this can damage the internal circuitry. No software installation or external power supply is required.

Compatibility Checks Before Ordering

Verify that the target vehicle uses a standard 16-pin OBDII connector and communicates over CAN, K-line, L-line or PWM protocols, as these are the only signal types the box is specified to detect. Confirm that your diagnostic scanner, recorder or programmer accepts 4 mm banana plugs or can be adapted to them. The accessory draws no separate power, so no battery or mains supply is needed, but ensure the vehicle ignition state matches the protocol you intend to monitor.

Highlights

  • 16-pin layout mirrors OBDII for quick, intuitive testing
  • 4 mm banana jacks accept any probe for flexible data access
  • Supports CAN bus, K-line, L-line and PWM protocols
  • Four coloured jumper sets let you run multiple tools at once
  • New condition ensures reliable performance from first use

Specifications

Typetype

Questions about this item

How can I verify the 16-pin OBDII breakout box is functioning correctly after connecting it?

Connect the box between the vehicle's OBDII port and your scanner; if the scanner communicates and reads live data across all pins, the breakout box is passing signals correctly.

What comes in the box with the TAURKENAM 16-pin OBDII breakout box and what must I supply myself?

The package includes the breakout box with 4 mm banana jacks and four sets of coloured jumper cables; you must provide your own diagnostic scanner, oscilloscope leads or other test equipment.

Which version of the TAURKENAM breakout box should I choose for CAN bus, K-line, L-line and PWM diagnostics?

The single 16-pin model listed supports CAN bus, K-line, L-line and PWM protocols, so no additional version selection is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.