We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled RGBW extension cable on a plastic spool with eight 5-pin connectors

TAURKENAM

TAURKENAM 12V RGBW 5Pin 22AWG 65.6ft extension cable with spool and 8 connectors

SKU CH-PZSN-XS8FZ

20-metre 22AWG RGBW extension cable on a spool with eight 5-pin connectors for 12-24V LED strips

  • Maximum conductivity with oxygen-free copper wire
  • Handles up to 4 A and 24 V for reliable power delivery
  • 6 ft length covers most extension jobs
  • Plastic spool allows custom cuts and tidy storage
  • Tinned copper resists oxidation and reduces heat build-up

12V RGBW 5-Pin Extension Kit

This 65.6 ft cable kit extends 12 V RGBW LED strips using 5-pin connections. It includes eight connectors and suits installers who need long runs for 5050 or 3528 strips. The oxygen-free copper conductors support up to 4 A current and 24 V input. Builders who need more than 65.6 ft in a single run should look elsewhere.

Replaces Short Factory Leads

The spool lets you cut exact lengths instead of relying on short pre-made jumpers. Upgrade when voltage drop across thin factory wire dims the far end of a strip. The 22 AWG gauge and tinned copper reduce resistance so colour stays consistent over distance. Runs that exceed 4 A per channel need a heavier gauge than this kit provides.

Steady Output on Long Runs

Tinned copper and oxygen-free strands limit oxidation and heat build-up during continuous operation. The stranded structure stays flexible when routed through channels or around corners. Colour balance remains stable because each conductor carries its share of current without excessive loss. Installations that demand sustained loads above 4 A per channel will require thicker wire.

Highlights

  • Maximum conductivity with oxygen-free copper wire
  • Handles up to 4 A and 24 V for reliable power delivery
  • 6 ft length covers most extension jobs
  • Plastic spool allows custom cuts and tidy storage
  • Tinned copper resists oxidation and reduces heat build-up

Specifications

No published specifications for this item yet.

Questions about this item

Does the 22AWG cable fit standard 5-pin RGBW connectors for 5050 and 3528 strips?

Yes, the 22-gauge 5-pin wire is made for standard RGBW connectors used with 5050 and 3528 LED strips.

How do I install the cable and connectors, and what step is often missed?

Cut the required length from the 65.6 ft spool, strip the ends, insert each wire into the matching terminal on the supplied 5-pin connectors, then tighten the screws — the step often missed is matching each colour to the correct pin before tightening.

Will the tinned copper conductors need replacement under normal 12V use?

The tinned copper resists oxidation and reduces heat at 0-4 A loads, so the cable should not need replacement during the normal lifespan of a 12 V RGBW installation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.