We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12 AWG power cord with NEMA 5-15P plug and stripped open end

TAURKENAM

TAURKENAM 12 AWG 12 ft 3-prong open-end power cord

SKU CH-25QK-SVNEJ

Heavy-duty 12 AWG cord with grounded plug and open end, rated 20 A wire, 15 A plug, 300 V AC max for 120 V or 277 V projects

  • 12 AWG heavy-duty wire handles 20 A for high-power tools
  • NEMA 5-15P plug rated 15 A at 125 V for standard outlets
  • 300 V AC maximum suits 120 V or 277 V projects
  • Open-end pigtail with three stripped wires enables direct wiring
  • 12 ft SJT jacket gives commercial-grade reach and durability

Direct-wire power cord for high-draw equipment

This 12 AWG cord terminates in a NEMA 5-15P plug on one end and three stripped conductors on the other, letting technicians hard-wire appliances that lack a factory inlet. It is built for 120 V or 277 V projects where a permanent connection is preferred over a plug-and-play cord. The heavy-duty SJT jacket suits commercial environments such as workshops, machine tools and fixed installations.

Rated 20 A on the wire

The 12-gauge copper handles up to 20 amps continuously while the moulded plug is rated for 15 amps, matching standard branch-circuit protection. Enhanced strain relief at the plug reduces conductor fatigue when the cord is routed through knockouts or cable glands. The 300 V AC insulation margin keeps the assembly cool during sustained loads on angle grinders, saws or washing machines.

Open-end pigtail enables permanent mounting

Three pre-stripped wires allow direct termination to terminal blocks, contactors or appliance leads without an intermediate connector. The grounded three-prong plug maintains safety earthing when the equipment is temporarily unplugged for service. Commercial-grade construction resists oil, abrasion and repeated flexing in industrial door operators and similar fixed-mount applications.

Highlights

  • 12 AWG heavy-duty wire handles 20 A for high-power tools
  • NEMA 5-15P plug rated 15 A at 125 V for standard outlets
  • 300 V AC maximum suits 120 V or 277 V projects
  • Open-end pigtail with three stripped wires enables direct wiring
  • 12 ft SJT jacket gives commercial-grade reach and durability

Specifications

No published specifications for this item yet.

Questions about this item

How do I wire the open-end pigtail on this 12 AWG cord, and which stripped wire is which?

The pigtail has three stripped wires: black for hot, white for neutral, green for ground. Match them to the appliance terminals exactly — black to brass, white to silver, green to ground screw — and torque each connection to the device spec.

What maintenance or replacement will this cord need over time?

Inspect the SJT jacket and the NEMA 5-15P plug for cuts, cracking or overheating discolouration. Replace the cord if the strain relief pulls loose, the plug blades loosen, or the insulation shows heat damage — commercial-grade SJT is durable but not indefinite.

What is the first limit I will hit running this cord at full load continuously?

The NEMA 5-15P plug is rated 15 A at 125 V (1875 W). Even though the 12 AWG wire handles 20 A, the plug caps continuous draw at 15 A, so that is the ceiling you reach first under sustained use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.