We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear plastic box holding assorted 10 mm 4 pin RGB LED strip connectors and 40 mounting clips

TAURKENAM

TAURKENAM 10mm 4 Pin 5050 RGB LED Strip Connector Kit 14 Types 40 Clips

SKU CH-CHKS-HKH9N

A 14-type solderless kit connects 10 mm 5050 RGB strips with waterproof and standard clips, plus 40 mounting clips included

  • Solder-free installation saves time with 14 connector types
  • Waterproof L-shape corners seal 10 mm RGB strips without peeling silicone
  • Five waterproof variants protect outdoor or bathroom lighting projects
  • T-shape splitters enable branching runs from a single power source
  • Forty mounting clips secure strips firmly to walls or ceilings

Solderless 10 mm 4-pin RGB kit for DIY lighting

This 14-type connector kit fits standard 10 mm 4-pin 5050 RGB strips and includes 40 mounting clips. It targets hobbyists and installers who want to join two full rolls without soldering. The assortment covers corner, branch, strip-to-strip, strip-to-wire and strip-to-controller links in one package.

Waterproof clamp limits and non-waterproof variants

Five of the 14 connector types are waterproof; they clamp over the silicone jacket so no peeling is required. The remaining L-shape, T-shape and wire-end connectors are non-waterproof and need the coating removed before use. The system relies on mechanical pressure only, so a firm squeeze is essential for reliable contact.

Capacity for two rolls and where headroom ends

The kit is sized for two complete rolls of 10 mm 4-pin 5050 RGB tape, providing 40 clips and enough jumpers for typical room-scale runs. Projects needing more than two rolls, longer continuous distances, or higher current than the strip rating will require additional connectors and power injection points not supplied here.

Highlights

  • Solder-free installation saves time with 14 connector types
  • Waterproof L-shape corners seal 10 mm RGB strips without peeling silicone
  • Five waterproof variants protect outdoor or bathroom lighting projects
  • T-shape splitters enable branching runs from a single power source
  • Forty mounting clips secure strips firmly to walls or ceilings

Specifications

No published specifications for this item yet.

Questions about this item

Which connector types should I pick for a two-roll RGB strip installation?

The kit supplies 14 types including waterproof L-corner, T-branch, strip-to-strip, strip-to-wire and strip-to-controller clips, covering the connections needed for two 10 mm 4-pin 5050 rolls.

What does the 10 mm 4-pin rating mean when the strips are powered up?

It confirms the connectors match standard 10 mm wide RGB tape with four contact pads, so power and colour signals pass through each clip without solder joints or dark spots.

How does the solderless clamp interface affect the maximum current the strips can draw?

Each connector clamps directly onto the copper pads, so the current limit is set by the 5050 strip’s own rating rather than by the connector design.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.