TAURKENAM
TAURKENAM 10ft 14-AWG 3-Prong Power Adapter NEMA 5-15 15A 125V UL Listed
Heavy-duty 14-AWG three-wire cord supplies 15 A at 125 V to appliances and tools, with a 10 ft reach and UL listing
- 10 ft reach lets you place appliances where you need them
- 14 AWG heavy-duty wire handles 15 A loads safely
- 3-prong NEMA 5-15 plug fits standard US outlets
- UL Listed certification confirms safety compliance
- Rated for 125 V AC to power air conditioners, dryers, refrigerators and tools
10ft 14-AWG Power Cord
This 10ft replacement power cord uses 14-AWG wire with three conductors and a NEMA 5-15 plug. It is rated for 15A at 125V AC and carries a UL listing. The cord is designed as a heavy-duty replacement for universal AC appliances and power tools.
Suits major appliances and high-draw tools
The 14-gauge construction handles the current draw of air conditioners, dryers, refrigerators, and lawn mowers. It is not for buyers who need a lighter gauge cord for low-power electronics or a longer reach beyond 10ft. Builders requiring a locking connector or a different plug configuration should look elsewhere.
14-AWG wire gauge
The 14-AWG wire size determines the safe current capacity for connected equipment. This gauge supports the rated 15A load for major appliances and power tools. A thinner gauge would not carry this load safely over the 10ft length.
Highlights
- 10 ft reach lets you place appliances where you need them
- 14 AWG heavy-duty wire handles 15 A loads safely
- 3-prong NEMA 5-15 plug fits standard US outlets
- UL Listed certification confirms safety compliance
- Rated for 125 V AC to power air conditioners, dryers, refrigerators and tools
Specifications
No published specifications for this item yet.
Questions about this item
How do I install this 14-AWG 3-prong cord on an appliance that uses a NEMA 5-15 plug?
Remove the old cord, strip the three conductors to the length the terminal block requires, then connect live, neutral and ground to their matching screws. The step most people miss is tightening each screw firmly so no copper strands can work loose under vibration.
What maintenance or replacement will this 10ft SJT cable need over time?
Inspect the outer jacket and the NEMA 5-15 plug blades at least once a year; if the insulation shows cracking, the plug gets hot, or the blades are bent or discoloured, replace the whole cord — the 14-AWG conductors themselves do not wear out in normal service.
What limit appears first when this 15A 125V cord runs a heavy load continuously?
The 15-ampere rating of the NEMA 5-15 plug and the 14-AWG conductors is the first ceiling; sustained current above 15 A will overheat the plug blades and the cable insulation before any other component reaches its limit.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



