We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular 6S LiPo pack with XT60 connector

Tattu

Tattu R-Line Version 3.0 1400mAh 22.2V 120C 6S1P LiPo Battery Pack XT60

SKU CH-E4F8-9B7D1

A 6S 1400mAh 22.2V LiPo pack with 120C discharge and XT60 plug for high-power FPV racing drones

  • Longer flights with 1400mAh capacity
  • Instant power from 120C discharge rate
  • Efficient 22.2V 6S1P configuration
  • Lighter weight improves racing agility
  • Secure XT60 plug ensures reliable connection

Tattu R-Line 3.0 6S LiPo Pack

This Tattu R-Line Version 3.0 battery is a 6S1P lithium polymer pack built for FPV racing drones. It delivers a 22.2 V nominal voltage from six cells and a 1400 mAh capacity with an XT60 plug for a secure connection. The 120 C discharge rating supplies the high current bursts needed for competitive flight.

Who this suits and who should look elsewhere

Pilots flying 6S FPV racers who want maximum punch-out and consistent voltage under load will benefit from the 120 C rating and low internal resistance. Builders needing longer endurance for cinematic cruising or craft that require a different cell count or connector should choose another pack.

The spec that decides fit

The 120 C continuous discharge rating is the single figure that determines whether this pack can meet the current demands of your motor and propeller combination without voltage sag.

Highlights

  • Longer flights with 1400mAh capacity
  • Instant power from 120C discharge rate
  • Efficient 22.2V 6S1P configuration
  • Lighter weight improves racing agility
  • Secure XT60 plug ensures reliable connection

Specifications

No published specifications for this item yet.

Questions about this item

What drone frame dimensions does the 1400 mAh 6S pack need to fit?

The 1400 mAh 6S pack fits standard 5-inch FPV frames with a battery strap slot; check your frame's maximum battery length and height before mounting.

How do I install the XT60 plug correctly and what step is often missed?

Solder the XT60 leads with correct polarity, insulate with heat-shrink, then secure the pack with a Velcro strap; the missed step is forgetting to balance-charge before the first flight.

When should the 6S 120C LiPo be replaced based on cell health?

Replace the pack when any cell's internal resistance rises sharply, voltage sag under load becomes severe, or physical swelling appears on the pouch.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.