Tapecase
Tapecase PTFE Slick Surface Glass Cloth Tape 4 in x 36 yd Brown
PTFE slick-surface glass cloth tape with silicone adhesive on polyethylene-coated cloth backing, 4 in wide by 36 yd long, 12 mil thick, 45 oz/in adhesion
- TypeCaulks
- PTFE slick surface glides over tools and parts
- Silicone adhesive holds 45 oz/in on steel
- 12 mil polyethylene coated cloth resists tearing
- 4 in by 36 yd roll covers large areas
- Brown colour suits indoor and outdoor use
PTFE Slick Surface Glass Cloth Tape
This tape is a PTFE slick surface glass cloth tape designed for assembly, manufacturing, general maintenance and repair, and warehouse use. It provides a low-friction surface that reduces wear and sticking in demanding environments. The polyethylene coated cloth backing offers durability for indoor and outdoor applications. It suits professionals needing reliable surface protection and smooth movement.
Silicone adhesive with clean removal
The tape uses a silicone adhesive system that delivers adhesion to steel of 45 oz/in while allowing clean removal without residue. At 12 mil thickness it resists abrasion and maintains performance across temperature variations. The continuous roll format supports consistent application across large areas. Noise and power draw are not applicable for this passive material.
Replaces standard cloth or duct tapes
This product upgrades from standard cloth or duct tapes when slick surface properties and clean removal are required. The jump is worth it for applications needing PTFE low-friction performance and silicone adhesive reliability. It is not for buyers who need a tape rated for specific clean removal time or those requiring a different backing material. The 36 yard length and 4 inch width suit high-volume use.
Highlights
- PTFE slick surface glides over tools and parts
- Silicone adhesive holds 45 oz/in on steel
- 12 mil polyethylene coated cloth resists tearing
- 4 in by 36 yd roll covers large areas
- Brown colour suits indoor and outdoor use
Specifications
| Type | Caulks |
|---|---|
| Brand | TAPECASE |
Questions about this item
How do I apply the 4 in wide PTFE glass cloth tape and what step causes adhesion problems?
Clean the surface thoroughly before pressing the 12 mil thick silicone adhesive side down; skipping surface prep is the main reason the 45 oz/in adhesion fails.
When will the brown 36 yd roll need replacement in a high-wear area?
The PTFE slick surface resists abrasion, so the roll lasts until the 12 mil backing wears through or the silicone adhesive loses grip after repeated thermal cycles.
What temperature limit appears first during continuous outdoor exposure?
The polyethylene coated cloth backing and silicone adhesive determine the upper service temperature; sustained heat beyond their rating degrades the 45 oz/in bond before the PTFE layer fails.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
