Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00942541BTC
In stock
T&S Brass
T&S Brass B-0232 8" Centerset Bath Faucet Chrome
An 8-inch centerset bath faucet with lever handles, swing nozzle and 2.20 gpm flow rate
- NameSink Mixing Faucet Swing Nozzle
- FinishChrome
- TypeScrub & Laboratory Faucets
- HandlesTwo
- Handle TypeLever
- Mounting Center8" Centerset
- 8" centerset fits standard three-hole sinks
- Lever handles provide smooth water control
- Two-handle design enables precise temperature mixing
- Swing nozzle directs flow where needed
- 20 gpm flow rate conserves water
8" Centerset Chrome Faucet
The T&S Brass B-0232 is a sink mixing faucet with a swing nozzle and a chrome finish. It mounts on an 8-inch centerset pattern and uses two lever handles for water control. The unit is classed as a scrub and laboratory faucet and is supplied new.
Suits commercial sinks needing swing clearance
This faucet fits installations that require a swing nozzle and lever operation on an 8-inch spread. It is not intended for single-hole basins, widespread layouts beyond the stated centres, or electronic sensor activation. Buyers needing a different handle style or fixed spout should look elsewhere.
2.20 gpm flow rate
The faucet delivers water at 2.20 gallons per minute through its 1/2-inch IPS eccentric flanged female inlets. This flow figure determines whether the fixture meets local code requirements or matches the demand of the intended sink. Verify the rate against project specifications before purchase.
Highlights
- 8" centerset fits standard three-hole sinks
- Lever handles provide smooth water control
- Two-handle design enables precise temperature mixing
- Swing nozzle directs flow where needed
- 20 gpm flow rate conserves water
Specifications
| Brand | T&S Brass |
|---|---|
| Model | B-0232 |
| Name | Sink Mixing Faucet Swing Nozzle |
| Finish | Chrome |
| Type | Scrub & Laboratory Faucets |
| Handles | Two |
| Handle Type | Lever |
| Mounting Center | 8" Centerset |
| Features | 059X Swing Nozzle 1/2" IPS eccentric flanged female inlets |
Questions about this item
What flow rate does the 1/2" IPS eccentric flanged female inlet connection cap in practice?
The faucet delivers 2.20 gpm through its 1/2" IPS eccentric flanged female inlets, so that flow rate is the practical limit at the supply connection.
What hole spacing does the 8" centerset mounting require on the sink or countertop?
The 8" centerset mounting needs two holes spaced exactly 8 inches on center for the hot and cold lever handles.
How is the 059X swing nozzle installed, and what step is often missed?
Thread the 059X swing nozzle into the spout body and tighten on the wrench flats; the step many miss is checking nozzle orientation before final torque so the lever handles have proper clearance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
