Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00936526BTC
In stock
T&S Brass
T&S Brass 010394-45 lever waste valve handle assembly
Stainless-steel lever handle assembly operates waste valves and measures 12 1/2 inches overall
- TypeManual Faucet
- Stainless steel construction resists corrosion in wet environments
- 12 1/2 inch lever provides extended reach for easy operation
- Silver finish matches commercial plumbing fixtures
- Ligature resistant design not required for standard installations
- Compatible with T&S brand waste valve systems
Lever Waste Valve Handle Assembly
The T&S Brass 010394-45 is a stainless steel lever handle assembly designed for manual faucet waste valves. It measures 12 1/2 inches in overall length with a 7/8 inch diameter and 1 1/8 inch width and height. The silver finish suits commercial or residential bath installations.
Suits T&S waste valve repairs
This handle fits T&S brand waste valves requiring a lever operator of these dimensions. It is not ligature resistant and has no threaded connection or pipe size specification. Buyers needing a ligature resistant design or a specific thread size should look elsewhere.
Verify valve compatibility first
Confirm the existing waste valve accepts a lever handle with a 7/8 inch diameter and 12 1/2 inch overall length. The assembly includes only the handle; no valve body or drain components are supplied. Check that the mounting interface matches your current T&S hardware before ordering.
Highlights
- Stainless steel construction resists corrosion in wet environments
- 12 1/2 inch lever provides extended reach for easy operation
- Silver finish matches commercial plumbing fixtures
- Ligature resistant design not required for standard installations
- Compatible with T&S brand waste valve systems
Specifications
| Brand | T&S |
|---|---|
| Type | Manual Faucet |
Questions about this item
What existing T&S waste valve body does this 010394-45 lever handle assembly attach to?
The assembly is designed to fit T&S brand waste valves; the stainless-steel lever measures 12 1/2 in overall length and 1 1/8 in overall height and width.
Will the 12 1/2 in lever clear adjacent faucets or backsplash on my current sink?
The handle’s overall height and width are both 1 1/8 in with a 7/8 in diameter, so compare those dimensions to your existing clearance.
How can I confirm the handle is installed correctly on the valve?
The silver stainless-steel lever should sit at the specified 1 1/8 in height and 7/8 in diameter, then rotate smoothly through the full open-to-close travel without binding.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
