We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Systor SYS611DP standalone SATA duplicator with eleven drive bays

Systor

Systor SYS611DP 1:11 SATA Duplicator & Sanitizer 36GB/min 600MB/sec

SKU CH-6ECA-9ZJC3

Standalone SATA duplicator copies or sanitises up to eleven 2.5 or 3.5 inch drives at 36 GB/min with DoD 5220.22-M erase compliance

  • Target1 to 11
  • Data Transfer Rate36.0GB/min (600MB/sec)
  • Operating TypeStandalone

TARGET SIZE 1 to 11

DATA TRANSFER RATE 36.0GB/min [600MB/sec]

  • Standalone operation copies up to 11 drives without a computer
  • 36 GB per minute transfer rate finishes large jobs quickly
  • DoD 5220.22-M compliant sanitisation erases data beyond recovery
  • Accepts 2.5" and 3.5" SATA drives directly with no adapters
  • Dual-port hot-swap bays let you swap drives while running

Systor SYS611DP SATA Duplicator 1:11

The Systor SYS611DP is a standalone SATA duplicator and sanitizer that copies one source drive to up to eleven targets at 36.0 GB per minute. It accepts both 2.5" and 3.5" hard drives or solid-state drives without adapters and operates without a host computer or software.

Suits high-volume SATA cloning

IT departments, forensic labs and data-recovery services that need simultaneous, sector-level duplication of SATA drives will benefit from the 600 MB/s throughput and DoD 5220.22-M sanitation mode. Buyers who require support for interfaces other than SATA, or who need network-attached or software-controlled operation, should look elsewhere because this unit is strictly standalone and SATA-only.

1:11 target ratio and 36.0 GB/min transfer rate

The single specification that determines fit is the eleven-target capacity combined with a 36.0 GB per minute (600 MB/sec) copy speed. If your workflow demands more than eleven simultaneous targets or a different interface, this duplicator will not meet the requirement.

Highlights

  • Standalone operation copies up to 11 drives without a computer
  • 36 GB per minute transfer rate finishes large jobs quickly
  • DoD 5220.22-M compliant sanitisation erases data beyond recovery
  • Accepts 2.5" and 3.5" SATA drives directly with no adapters
  • Dual-port hot-swap bays let you swap drives while running

Specifications

Target1 to 11
Data Transfer Rate36.0GB/min (600MB/sec)
Operating TypeStandalone

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I verify the duplicator copied my drive correctly after the run finishes?

The unit reports completion on its front panel and the target drives become bit-for-bit clones of the source, including partition and boot sectors, at up to 600MB/sec.

What comes in the box and what must I supply myself?

The duplicator includes 11 hot-swap SATA bays with individual 40mm cooling fans and a high-performance power supply; you provide the 2.5" or 3.5" SATA drives you want to copy or erase.

Which capacity or version of the SYS611DP should I choose for my workload?

The SYS611DP is a single 1:11 model rated at 36.0GB/min (600MB/sec) with DoD 5220.22-M sanitisation; select it when you need to duplicate or wipe up to eleven SATA drives simultaneously.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.