SYLVANIA
SYLVANIA HPL 575/115/X 575W 115V Halogen Bulb
A 575 W halogen bulb producing 12360 lumens at 3065 K with a 100 CRI and 2000-hour life
- TypeHalogen Bulbs
- Lumen Range12360
- Wattage575
- Color Temperature3065K
- Life Time Hours2000
- Color Rendering Index100
- High 12360-lumen output for bright stage illumination
- 3065K colour temperature delivers warm white light
- CRI 100 ensures accurate colour rendering
- 2000-hour rated life reduces replacement frequency
- G 9.5 2-pin base with heat sink for secure fit
Stage and studio lighting
This OSRAM HPL halogen bulb is built for fixtures that accept a G 9.5 2-pin base with heat sink. It delivers 12360 lumens at 3065K with a colour rendering index of 100, making it suitable for theatre, film and broadcast applications where accurate colour is essential.
Thermals noise and power
The lamp draws 575 watts at 115 volts and converts most of that energy into heat during normal operation. The integrated heat-sink base helps conduct thermal energy away from the pinch seal, while the halogen cycle maintains consistent output without audible noise.
Sustained load behaviour
Rated life is 2000 hours when operated at the specified voltage and in a fixture that provides adequate airflow. Continuous use at full power will see gradual lumen depreciation and eventual filament failure once the rated hours are reached.
Highlights
- High 12360-lumen output for bright stage illumination
- 3065K colour temperature delivers warm white light
- CRI 100 ensures accurate colour rendering
- 2000-hour rated life reduces replacement frequency
- G 9.5 2-pin base with heat sink for secure fit
Specifications
| Brand | OSRAM |
|---|---|
| Type | Halogen Bulbs |
| Lumen Range | 12360 |
| Wattage | 575 |
| Color Temperature | 3065K |
| Life Time Hours | 2000 |
| Color Rendering Index | 100 |
Questions about this item
How is the G 9.5 2-pin base with heat sink installed, and what step is often missed?
Align the two pins with the socket slots, push straight in until the base seats fully, then verify the heat sink sits flush against the fixture so airflow is not blocked.
What maintenance or replacement will this 575 W halogen bulb need after its rated life?
After approximately 2000 hours the filament will fail; replace the whole bulb — no user-serviceable parts inside.
What limit appears first when the lamp runs continuously at 115 V?
The 2000-hour rated life is the first constraint; lumen output of 12360 will gradually decline until the filament breaks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



