SYLVANIA
SYLVANIA 20307 CF7DS/850 7W G23 5000K 400LM fluorescent standard bulb
7 W G23-base compact fluorescent bulb delivers 400 lm of 5000 K daylight for magnetic-ballast fixtures
- TypeFluorescent Bulbs
- Lumen Range400
- Wattage7
- Color Temperature5000K
- Life Time Hours10000
- Color Rendering Index82
- Cool 5000K daylight tone for clear visibility
- 400 lumens from only 7 watts of power
- 10 000-hour rated life reduces replacement frequency
- G23 2-pin base fits magnetic-ballast fixtures
- 82 CRI renders colours accurately
Product identity
The Sylvania 20307 CF7DS/850 is a 7W single-tube compact fluorescent lamp with a G23 two-pin base. It delivers 400 lumens at a 5000K colour temperature and a CRI of 82, rated for 10000 hours of life. This plug-in bulb suits magnetic-ballast fixtures in offices, retail displays or utility areas needing cool white light.
Thermals noise and power
At 7 watts the lamp runs cool compared with incandescent equivalents and produces no audible hum from the magnetic ballast. The low power draw keeps circuit loading minimal in multi-lamp installations. Surface temperature stays modest during continuous operation, reducing heat load in enclosed fittings.
Upgrade context
The bulb directly replaces any 7W G23 single-tube CFL of the same pin spacing and 5.3 inch overall length. It is not for fixtures requiring four-pin electronic-ballast lamps, higher lumen outputs, different colour temperatures or screw-in bases. The jump is worthwhile when an existing 7W G23 lamp fails and a new 5000K unit with 10000-hour rating is specified.
Highlights
- Cool 5000K daylight tone for clear visibility
- 400 lumens from only 7 watts of power
- 10 000-hour rated life reduces replacement frequency
- G23 2-pin base fits magnetic-ballast fixtures
- 82 CRI renders colours accurately
Specifications
| Brand | Sylvania |
|---|---|
| Type | Fluorescent Bulbs |
| Lumen Range | 400 |
| Wattage | 7 |
| Color Temperature | 5000K |
| Life Time Hours | 10000 |
| Color Rendering Index | 82 |
Questions about this item
How do I install the G23 2-pin base and which orientation mistake should I avoid?
Align the two pins with the socket slots and press straight in until the bulb seats fully; forcing it at an angle bends the pins and prevents proper contact.
What maintenance or replacement will this 10000-hour fluorescent bulb need later?
After roughly 10000 hours the lamp reaches end of life and must be replaced; no interim cleaning or component service is required.
At what point does the 400-lumen output drop noticeably during continuous operation?
Light output gradually declines over the 10000-hour rated life, with the most visible reduction appearing near the end of that period.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



